Telephone operation
Call waiting
When you subscribe to call waiting service from your telephone service
provider, you hear an alert tone if there is an incoming call while you are on
another call.
•
Press the corresponding line button,
the telephone base to put your current call on hold and take the new call.
•
Press the corresponding line button,
the telephone base at any time to switch back and forth between calls.
Handset speakerphone
During a call, press
handset use.
After ending a call on line 1, there may be a few seconds delay before the
key press can accurately determine the availability of line 1. During this time,
pressing
may select line 2 automatically.
Volume
During a call, you can adjust the listening volume on the handset or
telephone base.
To adjust the listening volume of the handset:
/VOL/
•
Press
To adjust the listening volume of the telephone base:
•
Press
/VOL/
Silence the ringer
When the telephone is ringing, you can temporarily silence the ringer of the
handset or telephone base without disconnecting the call. The next call rings
normal at the preset volume.
To silence the ringer when there is an incoming call:
Press the SILENCE softkey on the handset or
•
telephone base. The screen temporarily shows Ringer
muted for a few seconds.
-OR-
Press CANCEL on the telephone base. The screen
•
temporarily shows Ringer muted for a few seconds.
to switch between speakerphone and normal
on the handset while on a call.
on the telephone base while on a call.
, on the handset or FLASH on
or
, on the handset or FLASH on
or
30
1
Line 1
Incoming
call
SILENCE
Ringer muted