Intertek FUNJUMP8FT User Manual page 20

3. Attach all the top rails to form a large circle,
Joining the last link may require two
people .The second person should hold the
opposite side, while you bring both ends of the
circle together.
5.
5. Attach the leg support to leg extension
tightly secure together with the screws.
7. With stitching portion facing down, lay
jumping mat inside frame and attach a
spring into one of the triangle rings on
the mat. Then attach the other end of
the spring to the frame.
4. Attach the all leg supports you
assembled in
STEP 2 to the top frame.
wdfdfewrr
6.At this stage the trampoline should like the
picture above.
8. Repeat STEP 7directly across from
where you attach the first spring. Then
attach two more springs half distance
between the first two springs, directly
across from each other. This will ensure
equal tension is distributed between the
springs.