Busch-Jaeger WaveLINE 6701 Manual page 39

Disconnecting and resetting
devices
Disconnecting and resetting all devices
In operating mode "EA", all assignments can be deleted.
1 Set the selector on the 6701
Einbauempfänger WaveLINE
receiver to "EA". The LED flashes
red rapidly (fig. 3-2).
2 Press the programming button
(fig. 3-1). After 3 sec. the LED
switches from blinking to steady
light. Press the button again. After
an additional 3 sec., the LED
starts flashing again rapidly.
Release the button.
3 The devices are disconnected
from each other and reset.
4 Set the operating mode to "R" or
"S" on the receiver.
ENG
S
R
P
39
E
EA
1+2