Table of Contents
Advertisement
FUNCTIONAL LAYOUT FOR HANDSET UNIT
LINE 2 KEY
VOLUME SLIDE SWITCH
LINE 1 KEY
* TONE KEY
CHAN KEY
PROG KEY
REDIAL KEY
CONF KEY
FUNCTION KEYS
keys
Description
LINE 1
To get dial tone when handset
in standby mode.
To perform flash operation
when handset is in Talk mode.
LINE 2
To get dial tone when handset
in standby mode.
To perform flash operation
when handset is in Talk mode.
OFF
To hang up a line.
Number
For telephone number dialing,
keys
programming, etc.
*TONE
To change the dialing mode
temporarily from pulse to tone
during a call.
PROG
To enter/exit the programming mode.
CHAN
To change the channel during
a call.
HOLD
To place a call on HOLD.
To add a 2 second pause during
telephone number programming.
MEM
To enter memory dialing mode.
CONF
To establish a conference call
between Line 1 and Line 2
REDIAL
To redial the last number dialed.
Handset
To select the handset volume
volume
Hight (H), Middle or Low (L)
slide
switch
LOW BATT LED
OFF KEY
NUMBER KEYS
MEM KEY
HOLD KEY
LED
LED status Description
LINE 1
ON
Flash
(fast)
Flash
(double
flashing) telephone.
Flash
(with ringing call for line 1
singal)
LINE 2
ON
Flash
(fast)
Flash
(double
flashing)
Flash
(with ringing call for line 2
singal)
LOW
Flash
BATT
7
When handset is
connected to line 1.
When line1 is ON
HOLD
When line 1 is used by
a parallel connected
When there is incoming
When handset is
connected to line 2
When line 2 is ON
HOLD
When line 2 is used by
a parallel connected
telephone.
When there is incoming
To indicate low battery
condition
Advertisement
Table of Contents
