745Vsd3 Specifications; Physical Specifications; Electrical Specifications; Speaker Specifications - Honeywell ADEMCO 745VSD3 Installation And Setup Manual

745VSD3 SPECIFICATIONS

Physical Specifications

Measurements:

Electrical Specifications

Voltage Requirements:
Current (Standby):

Speaker Specifications

Note: Use 8-ohm, 16-ohm, or 32-ohm, 15 watt speakers
8-ohm Speaker:
16-ohm Speaker:
32-ohm Speaker:
WARRANTY INFORMATION
For the latest warranty information, please go to:
http://www.security.honeywell.com/hsc/resources/wa/index.html
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL
PANEL THAT IS USED WITH THIS DEVICE FOR WARRANTY
INFORMATION AND LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
4" x 2-3/4" x 1-3/4"
12-16 VDC
15mA
1400mA (max, steady siren)
1050mA (max, steady siren)
500mA (max, steady siren)
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Copyright © 2009 Honeywell International Inc.
www.honeywell.com/security
- 4 -
ÊK6210V1,Š ÊK6210V1,Š ÊK6210V1,Š ÊK6210V1,Š
K6210V1 2/09 Rev C