Advertisement
Smart EAR 3D
Hi-Fi 3D Audio Requirements:
1.
A chassis with front audio output jacks
2.
An earphone or a headphone
3.
Speakers
4.
Windows 7/ 8.1(64bit)/ 10(64bit) operation system
Installation Guide:
1.
Make sure the front audio cable of the chassis connected to the front audio header of
the motherboard properly.
2.
Install the Smart Ear 3D Utility from the driver DVD.
3.
Connect the earphone or headphone to the front audio jack of the chassis for Smart
Gain and 3D Sound Field functions.
4. 4. Connect the speakers to line out port of rear panel for Smart PREAMP function.
Note
» If you want to use an AC'97 front audio output cable, please disable the "Front Panel Jack
Detection" setting. This setting can be found via O.S. Audio Utility.
28 | Chapter 3: UEFI BIOS & Software
Advertisement
