Table of Contents
Advertisement
Quick Links
BIOS User Guide
Z590I VALKYRIE
BIOS Update ������������������������������������������������������������������������������������� 2
UEFI BIOS Setup �������������������������������������������������������������������������������� 6
EZ Mode ������������������������������������������������������������������������������������������� 7
A�I FAN Control ��������������������������������������������������������������������������������� 8
VIVID LED Control ����������������������������������������������������������������������������� 9
1� Main Menu ����������������������������������������������������������������������������������10
2� Advanced Menu ���������������������������������������������������������������������������11
3� Chipset Menu �������������������������������������������������������������������������������24
4� Boot Menu �����������������������������������������������������������������������������������29
5� Security Menu ������������������������������������������������������������������������������32
6� Tweaker Menu �����������������������������������������������������������������������������35
7� Save & Exit Menu �������������������������������������������������������������������������49
Advertisement
Table of Contents
Related Manuals for Biostar BIOS Z590I VALKYRIE
Summary of Contents for Biostar BIOS Z590I VALKYRIE
-
Page 1: Table Of Contents
BIOS User Guide Z590I VALKYRIE BIOS Update ������������������������������������������������������������������������������������� 2 UEFI BIOS Setup �������������������������������������������������������������������������������� 6 EZ Mode ������������������������������������������������������������������������������������������� 7 A�I FAN Control ��������������������������������������������������������������������������������� 8 VIVID LED Control ����������������������������������������������������������������������������� 9 1� Main Menu ����������������������������������������������������������������������������������10 2� Advanced Menu ���������������������������������������������������������������������������11 3� Chipset Menu �������������������������������������������������������������������������������24 4�... -
Page 2: Bios Update
The BIOS can be updated using either of the following utilities: • BIOSTAR BIOS-FLASHER: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM. - Page 3 Z590I VALKYRIE 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the <Y> key to restart system. 8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
- Page 4 Then, the BIOS Update is completed. BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/ 3. Launch BIOS Update Utility and click the “Update BIOS” button on the main screen.
- Page 5 Z590I VALKYRIE 6. After the BIOS Update process is finished, click on “OK” to reboot the system. 7. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup. After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults> function to load Optimized Defaults, and select <Save Changes and Reset>...
-
Page 6: Uefi Bios Setup
UEFI BIOS Setup Introduction The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to NVRAM. UEFI BIOS determines what a computer can do without accessing programs from a disk. -
Page 7: Ez Mode
Z590I VALKYRIE EZ Mode In EZ mode, it allows you to quickly operate the basic system setting. Press <F7> to display the EZ Mode menu. 1� System Time: Display the system clock. 2� Boot Priority Bar: you can move the device icons to change the boot priority. 3. -
Page 8: A�I Fan Control
A�I FAN Control Press <F5> to display the A.I FAN Control menu. 1� CPU FAN/ CPU OPT/ System1/ MOS FAN: Click button to set the status value of CPU FAN, SYSTEM FAN and MOS FAN. 2� PWM/ Temperature Panel: According to the fan PWM value corresponding to CPU and system temperature to adjust the fan speed. -
Page 9: Vivid Led Control
Z590I VALKYRIE VIVID LED Control Press <F6> to display the VIVID LED DJ Control menu. 1� LED SPARKLE: Allows to you choose sparkle of the LEDs. • Permanent: LEDs are constantly lit. • Breath: LEDs gradually flash on and off. • ... -
Page 10: 1� Main Menu
1� Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information It shows system information including UEFI BIOS version, Project Code, Model Name, Build Date and etc. -
Page 11: 2� Advanced Menu
Z590I VALKYRIE 2� Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Note » Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Connectivity Configuration This item shows Configure Connectivity related options. - Page 12 Preboot BLE This item enables or disables Preboot Bluetooth function. Options: Disabled (Default) / Enabled Note » The following items appear only when you set the Preboot BLE function to [Enabled]. BLE Reconnection Delay This item Delay prior to connecting BLE host controller. Value between 0-1000ms. Default is 100ms.
- Page 13 Z590I VALKYRIE CPU Configuration This item shows CPU Information Overclocking Lock This item enables or disables Overclocking Lock (TIT 20) in FLEX_RATIO (194) MSR. Options: Disabled (Default) / Enabled Hardware Prefetcher This item allows you to turn on / off the MLC streamer prefetcher. Options: Enabled (Default) / Disabled Adjacent Cache Line Prefetch This item to turn on / off prefetching of adjacent cache lines.
- Page 14 Hyper-Threading This item enables or disables Hyper-Threading. Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper- Threading Technology). Options: Enabled (Default) / Disabled This item enables or disables AES (Advanced Encryption Standard). Options: Enabled (Default) / Disabled SATA and RST Configuration The BIOS will automatically detect the presence of SATA devices.
- Page 15 Z590I VALKYRIE Thunderbolt (TM) Configuration Discrete Thunderbolt(TM) support This item enables or disables Discrete Thunderbolt (TM) support. Options: Disabled (Default) / Enabled Trusted Computing Security Device Support This item enables or disables BIOS support for security device. O.S will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
- Page 16 SHA-1 PCR Bank This item enables or disables SHA-1 PCR Bank. Options: Disabled (Default) / Enabled SHA256 PCR Bank This item enables or disables SHA256 PCR Bank. Options: Enabled (Default) / Disabled SHA384 PCR Bank This item enables or disables SHA384 PCR Bank. Options: Disabled (Default) / Enabled SM3_256 PCR Bank This item enables or disables SM3_256 PCR Bank.
- Page 17 Z590I VALKYRIE ACPI Settings Enable ACPI Auto Configuration This item enables or disables BIOS ACPI auto configuration function. Options: Disabled (Default) / Enabled Enable Hibernation This item enables or disables system ability to Hibernate (0S/S4 sleep state). This option may not be effective with some 0Ss.
- Page 18 Wake system with Fixed Time This item enables or disables the system to wake on by alarm event. When this item is enabled, the system will wake on the hr::min::sec specified. Options: Disabled (Default) / Enabled Wake up date You can choose which date the system will boot up. Wake up hour / Wake up minute / Wake up second You can choose the system boot up time, input hour, minute and second to specify.
- Page 19 Z590I VALKYRIE PCI Subsystem Settings Above 4G Decoding This item enables or disables Above 4G Decoding. Globally enables or disables 64bit capable Devices to be Decoded in Above 4G Address Space (Only if system supports 64bit PCI decoding). Options: Enabled (Default) / Disabled Re-Size BAR Support If system has Resizable BAR capable PCIe Devices, this option Enables or Disables Resizable BAR Support (Only if system supports 64 bit PCI Decoding).
- Page 20 USB Configuration Legacy USB Support The item allows you to enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Options: Enabled (Default) / Disabled / Auto XHCI Hand-off This is a workaround for OSes without XHCI hand-off support.
- Page 21 Z590I VALKYRIE Device power-up delay Maximum time the device will take before it properly reports itself to the Host Controller. “Auto” uses default value: for a Root port it is 100ms, for a Hub port the delay is taken from Hub descriptor.
- Page 22 IPv4 HTTP Support This item enables or disables IPv4 HTTP Boot Support. If disabled IPV4 HTTP boot support will not be available. Options: Disabled (Default) / Enabled IPv6 PXE Support This item enables or disables IPv6 PXE Boot Support. If disabled IPv6 PXE boot support will not be available.
- Page 23 Z590I VALKYRIE NVMe Configuration The item shows NVMe controller and driver information. Offboard PCIe SATA Controller 2. Advanced Menu | 23...
-
Page 24: 3� Chipset Menu
3� Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. Note ... - Page 25 Z590I VALKYRIE System Agent (SA) Configuration Internal Graphics This item keeps IGFX enabled based on the setup options. Options: Auto (Default) / Enabled / Disabled Primary Display This item selects which of IGFX/ PEG/ PCI Graphics device should be Primary Display or select SG for Switchable Gfx.
- Page 26 Max TOLUD Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller. Options: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB / 2.25 GB / 2.5 GB / 2.75 GB / 3 GB / 3.25 GB / 3.5GB VT-d This item enables or disables VT-d capability.
- Page 27 Z590I VALKYRIE PCI Express Configuration HD Audio Control Detection of the HD-Audio device. Disabled = HDA will be unconditionally disabled. Enabled = HDA will be unconditionally enabled. Auto = HDA will be enabled if present, disabled otherwise. Options: Enabled (Default) / Auto / Disabled ErP Control When ErP is enabled, the system will meet ErP requirement.
- Page 28 Onboard Device Onboard LAN1 This item enables or disables Onbaord LAN1. Options: Enabled (Default) / Disabled 28 | 3. Chipset Menu...
-
Page 29: 4� Boot Menu
Z590I VALKYRIE 4� Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Options: 1 (Default) Bootup NumLock State This item selects the keyboard NumLock state. - Page 30 Fast Boot This item allows you to enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Options: Disabled (Default) / Enabled Note » The following items appear only when you set the Fast Boot function to [Enabled] SATA Support If Last Boot HDD Only, Only last boot HDD device will be available in Post.
- Page 31 Z590I VALKYRIE CSM Support This option enables or disables CSM support. Options: Disabled (Default) / Enabled Note » The following items appear only when you set the CSM Support function to [Enabled] Network This option controls the execution of UEFI and Legacy PXE OpROM. Options: Legacy (Default) / UEFI / Do not launch Storage This option controls the execution of UEFI and Legacy Storage OpROM.
-
Page 32: 5� Security Menu
5� Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. 32 | 5. Security Menu... - Page 33 Z590I VALKYRIE Secure Boot Menu Secure Boot Secure Boot feature is active if secure boot is Enabled, when Platform Key(PK) is enrolled and the System is in User mode. The mode change requires platform reset. Options: Disabled (Default) / Enabled Secure Boot Mode Secure Boot mode options: Standard or Custom mode.
- Page 34 Key Management Factory Key Provision Install factory default Keys on next re-boot only when system in setup mode. Options: Disabled (Default) / Enabled Restore Factory Keys Force System to User Mode. Configure NVRAM to contain OEM-defined factory default Secure Boot Keys. Restore To Setup Mode Delete NVRAM content of all UEFI Secure Boot Key databases.
-
Page 35: 6� Tweaker Menu
Z590I VALKYRIE 6� Tweaker Menu This submenu allows you to change voltage and clock of various devices. Note » We suggest you use the default setting. Changing the voltage and clock improperly may damage the device. » The options and default settings might be different by RAM or CPU models. ... - Page 36 CPU Ratio Mode This item sets CPU Ratio Mode. Options: Auto (Default) / All Cores / Per Core / Fixed Note » The following items appear only when you set the CPU Ratio Mode function to [All Cores & Fixed] Core Max OC Ratio This item sets the maximum OC Ratio for the CPU Core.
- Page 37 Z590I VALKYRIE Realtime Memory Timing This item enables or disables realtime memory timings. When enabled, the system will allow performing realtime memory timing changes after MRC_DONE. Options: Enabled (Default) / Disabled This item allows you to select CAS Latency, 0: AUTO, max: 36 Options: Auto (Default) tRCD/tRP This item allows you to select RAS to CAS delay time and Row Prechrge delay time, 0: AUTO,...
- Page 38 tWTR This item allows you to select Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 Options: Auto (Default) tWTR_L This item allows you to select Min Internal Write to Read Command Delay Time, Same Bank Group, 0: AUTO, max: 60 Options: Auto (Default) tWTR_S This item allows you to select Min Internal Write to Read Command Delay Time, Differnet Bank...
- Page 39 Z590I VALKYRIE tRD2WR_SG This item delay between Read-to-Write commands in the same Bank Group. 0-Auto, Range 4-54. Options: Auto (Default) tRD2WR_DG This item delay between Read-to-Write commands in different Bank Group for DDR4. All other DDR technologies should set this equal to SG. 0-Auto, Range 4-54. Options: Auto (Default) tRD2WR_DR This item delay between Read-to-Write commands in different Ranks.
- Page 40 Advanced Timing Configuration tRDPRE This item Holds DDR timing parameter tRDPRE. RD to PRE same bank minimum delay in DCLK cycles. Supported Range is 6-15. Options: Auto (Default) tWRPRE This item Holds DDR timing parameter tWRPRE. WR to PRE same bank minimum delay in tCK cycles.
- Page 41 Z590I VALKYRIE tCPDED This item Holds DDR timing parameter tCPDED. Power down to command bus tri-state delay in tCK cycles (for DDR4) supported Range is 1-7 in 1N mode. Options: Auto (Default) tAONPD This item Holds DDR timing parameter tAONPD. Supported range is 4-30. Options: Auto (Default) tREFIx9 This item maximum time allowed between refreshes to a rank (in intervals of 1024 DCLK cycles).
- Page 42 RttPark Options: Auto (Default) Rank Interleave Options: Enabled (Default) / Disabled Enhanced Interleave Options: Enabled (Default) / Disabled ODT Delay Duration Configuration ODT Read Duration This item allows you to controls the length of the ODT pulse for read commands. Default is 6 DCLK cycles (BL / 2 +2) Options: Auto (Default) ODT Read Delay...
- Page 43 Z590I VALKYRIE Voltage Configuration BCLK Aware Adaptive Voltage This item enables or disables BCLK Aware Adaptive Voltage. When enabled, pcode will be aware of the BCLK frequency when calculating the CPU V/F curves. This is ideal for BCLK OC to avoid high voltage overrides.
- Page 44 CPU GT Voltage This item CPU GT Voltage. Options: Auto (Default) / Override / Adaptivez Note » The following items appear only when you set the CPU Vcore Voltage to [Override] CPU GT Adjust Voltage Options: 0.800 (Default), Range: 0.400V-1.500V Note ...
- Page 45 Z590I VALKYRIE DDR VPP Voltage This item sets DRAM Activating Power Supply (2.375V~3.0V), default 2.500V. Options: Auto (Default) CPU Power Management Intel(R) Speed Optimizer (ISO) This item allows you to set Intel Speed Optimizer (ISO). Options: Supported (Default) / Unsupported Intel(R) SpeedStep(tm) This item allows more than two frequency ranges to be supported.
- Page 46 Power Limit 2 Override This item enables or disables Power Limit 2 Override. If this option is disabled, BIOS will program the default values for Power Limit 2. Options: Enabled (Default) / Disabled Note » The following items appear only when you set the Power Limit 2 Override function to [Enabled] Power Limit 2 This item Power Limit 2 value in Milli Watts.
- Page 47 Z590I VALKYRIE FCLK Frequency for Early Power On This item FCLK frequency can take values of 400MHz, 800MHz and 1GHz (1GHz not supported for ULT/ULX SKUs). Options: 1GHz (Default) / Normal (800Mhz) / 400MHz Thermal Monitor This item enables or disables Thermal Monitor. Options: Enabled (Default) / Disabled AVX2 Ratio Offset This item AVX2 Ratio Offset.
- Page 48 Maximum GT frequency This item maximum GT frequency limited by te user. Value beyond the range will be clipped to min/max supported by SKU. Options: Default Max Frequency (Default) Disable Turbo GT frequency This item Disable Turbo GT frequency. Enabled: Disables Turbo GT frequency. Disabled: GT frequency is no limited.
-
Page 49: 7� Save & Exit Menu
Z590I VALKYRIE 7� Save & Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Discard Changes and Exit Abandon all changes made during the current session and exit setup. Save Changes and Reset Reset the system after saving the changes.