Advertisement
3.3 Software
Installing Software
1.
Insert the Setup DVD to the optical drive. The driver installation program would appear if
the Auto-run function has been enabled.
2.
Select Software Installation, and then click on the respective software title.
3.
Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process is completed, you will see the software icon showing on the
desktop. Double-click the icon to launch it.
Note
» All the information and content about following software are subject to be changed without notice.
For better performance, the software is being continuously updated.
» The information and pictures described below are for your reference only. The actual information
and settings on board may be slightly different from this manual.
TOverclocker
TOverclocker presents a simple Windows-based system performance enhancement and
manageability utility. It features several powerful and easy to use tools such as Overclocking
for enhancing system performance, also for special enhancement on CPU and Memory. Smart-
Fan management and PC health are for monitoring system status. This utility also allows you
to make overclocking profiles saving unlimitedly, and pre-set OC modes are for easy OC. (The
screenshots below are for reference only)
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s). You can select
memory module on a specific slot to see its information.
Chapter 3: UEFI BIOS & Software | 23
GAMING Z170X
Advertisement
