Canon imagePRESS 1135 Series Troubleshooting Manual page 178

<Work procedure 2-6>
23) Disassemble the Steering Roller Unit.
- 1 Steering Roller [1]
- 1 E-ring [2]
- 1 Slide Rail Holder (Rear) Unit (including 2 grounding plates) [3]
- 1 Bushing [4]
- 1 Bearing [5]
24) Apply grease (Super lube) half the size of a rice grain to the entire circumference [A] where the Steering
Roller [1] (a new part) comes in contact with the bearing.
25) Install the parts removed in step 23 to the new Steering Roller in reverse order.
11 / 12