VTech DS3111-2 User Manual page 10

Installation
remove the handset and place it in the telephone base
or charger again.
On the telephone base, press and hold FIND HANDSET
2.
for about four seconds (until the red IN USE light on the
telephone base turns on) and then release the button.
The handset will show PLEASE WAIT... and it will take
about 10 seconds to complete the registration process.
The handset will show REGISTERED and will beep if
registration is successful.
When the registration is complete, the newly registered
handset will be assigned the next available handset
registration number. For instance, if you already have
HANDSET 1 and HANDSET 2, the next registered handset
will be HANDSET 3.
www.vtechphones.com
PLEASE WAIT...
• If you experience
difficulty
registering a
handset, see the
HANDSET X
Troubleshooting
REGISTERED
section on
page 40.
7