Display Panel Operations - Viking VCFB304 Service Notebook

Keyboard Entry Tone
Command Accepted Tone
Activate Controls Pad
Frz Temp Pad
(Shown only on All Freezer)
Ref Temp Pad
(Shown only on All Refers)
Higher Pad
Lower Pad
Display Panel Operation
Indicates a pad was pressed, command read and accepted.
Turn off entry tone be pressing and holding Activate
Controls pad for 3 to 5 seconds.
Three short tones indicate command accepted.
1. Activates control panel. Control panel remains active
at least 10 minutes.
2. Turns off Power Up Alarm (flashing lights), after
power is first plugged in or after power outage.
Note: All pads, except Alarm Off, are inactive until
Activate Controls is pressed.
Activates freezer temperature setting mode.
1. Freezer indicator light will glow. Freezer temperature
setting will be displayed. Factory setting is 5.
2. Change freezer temperature setting by pressing
Higher or Lower pad.
Activates refrigerator temperatures setting mode.
1. Refrigerator indicator light will glow. Refrigerator
temperature setting will be displayed. Factory setting
is 5.
2. Press and hold Higher pad to raise temperature setting
at a faster rate.
Raises temperature settings one bar at a time. If entry
tone is on, tone will sound at each bar level until top level
is reached.
1. Turn on temperature setting function of control panel
by pressing Higher pad.
2. Press and hold Higher pad to raise temperature setting
at a faster rate.
Lower temperature settings on bar at a time. If entry tone
is on, tone will sound at each bar level until bottom level
is reached.
1. Turn on temperature setting function of control panel
by pressing Lower pad.
2. Press and hold Lower pad to lower temperature
setting at a faster rate.
12