Setup - Qwest 20-2432 Owner's Manual

2.4ghz digital spread spectrum cordless telephone system
Table of Contents

Advertisement

Setup

Setup
Setup
Setup
Setup
Plug the AC power adapter into an electrical outlet, and the DC connector
into the back of the base unit.
Connecting to the telephone lines
Your 2-Line 20-2432
20-2432
20-2432
20-2432 will work fine even if you only have one telephone line.
20-2432
We recommend connecting the modular telephone cord to the jack labeled
LINE 1 / L1 + L2
LINE 1 / L1 + L2
LINE 1 / L1 + L2
LINE 1 / L1 + L2, located on the bottom of the Base Unit. Here are steps for
LINE 1 / L1 + L2
connecting 2 2 2 2 2 lines:
If you have 2 Lines
2 Lines coming out of a Single Wall Jack:
2 Lines
2 Lines
2 Lines
Connect a 4-wire
4-wire
4-wire
4-wire (RJ-14) modular phone cord between the wall jack and the
4-wire
phone jack labeled L1 / L1 + L2.
L1 / L1 + L2.
L1 / L1 + L2.
L1 / L1 + L2.
L1 / L1 + L2.
If you have 2 Lines,
2 Lines,
2 Lines,
2 Lines, each coming out of Separate Wall Jacks:
2 Lines,
Connect a modular phone cord from the wall jack you want to designate as
your LINE 1, to the LINE 1 / L1 + L2
LINE 1 / L1 + L2 jack on the bottom of the Base Unit. Next,
LINE 1 / L1 + L2
LINE 1 / L1 + L2
LINE 1 / L1 + L2
connect a phone cord from the remaining wall jack to the LINE 2
Base Unit.
Data Port
Data Port
Data Port
Data Port
Data Port
Your 2-Line 20-2432
20-2432
20-2432
20-2432 has a Data Port on the back of the Base Unit. This port
20-2432
provides an easy way to connect your fax machine, laptop computer, modem
or other telephone device for direct access to LINE 2
The Data Port only provides access to Line 2, so you must have an active line
LINE 2
LINE 2
connected to the LINE 2
LINE 2
LINE 2 jack on the bottom of the Base Unit. Connect a
modular phone cord from the Data Port (look for the small door marked DATA
on the back of the Base Unit) to your fax, laptop, etc.
NOTE: While the Data Port is in use, accidental use of Line 2 by a parallel
NOTE:
NOTE:
NOTE:
NOTE:
phone, your 20-2432
20-2432
20-2432
20-2432, or a Call Waiting ID alert may interrupt the data
20-2432
transmission.
Single Wall Jack:
Single Wall Jack:
Single Wall Jack:
Single Wall Jack:
Separate Wall Jacks:
Separate Wall Jacks:
Separate Wall Jacks:
Separate Wall Jacks:
LINE 2
LINE 2
LINE 2
LINE 2 jack on the
LINE 2
LINE 2
LINE 2
LINE 2.
7
DATA
DATA
DATA
DATA

Advertisement

Table of Contents
loading

Table of Contents