Verification Of Washed Parts - MAGIDO GROUP X51 Series Operation And Maintenance Manual

MACHINE OPERATION
9. Regulate the inclination of the lower spray tube so that the water jet turns the basket (only for the
machine without driven basket ).
10. Close the lid and secure it properly with its latch;
11. Set the desired wash time with the TIMER (max 60 min.));
12. Push the START button S4;
13. At the end of the wash cycle open the lid; if the basket rotation has not stopped yet, the brake will
automatically stop it.
14. Unload the washed parts (NOTE : always use protective clothing listed above)
S7
S3
TERMOSTATO
S1
TENSIONE
H4
LIM. T.

Verification of washed parts

At the end of the cycle verify the cleanliness of the parts. To improve the quality of the wash follow this
instruction :

Change the speed of rotation of the basket (only for the machines without driven basket). To do this
change the inclination of the lower spray tube

Increase wash time.
REVISIONE: X51-1213 EN
S0
S5
TIMER
DIS. A. POMPA
S4
LIVELLO RISC.
H3
H2
QS1
24 MAGIDO GROUP S.r.l.