Table of Contents
Advertisement
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR section
To check the VTR section, set the VTR to the "Forced VTR power ON" mode.
Operate the VTR functions using the adjustment remote commander (With the HOLD switch set in the OFF position).
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
Note: Set the "Forced VTR Power ON" mode before
disconnecting the lens block (CD-569 board).
AC power
adaptor
AC IN
Caution
Connect only when checking
for ejection.
I/F unit for LANC control
(J-6082-521-A)
CPC-15
(J-6082-564-A)
DCR-PC1000/PC1000E
J001
DC-IN
FP-166 flexible
board (6P)
CN1002
8
1
CN1009
2. DISASSEMBLY
2. DISASSEMBLY
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: A, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
FP-164 flexible
board (80P)
CN1013
CN1014
CN1010
CN1007
CN1017
FP-172 flexible
board (80P)
Adjustment remote
J921
commander (RM-95)
A/V
A/V connecting cable (1)
(1-823-156-51)
2-7
Mechanism deck
CN1008
EVF assembly
CN921
Video (Yellow)
Monitor TV
Advertisement
Table of Contents
