Yamaha FX10X Assembly Manual page 77

1 Corrugated tube (left grip warmer
lead, grip/thumb warmer adjust-
ment switch lead, brake light
switch lead, and headlight beam
switch lead)
2 Parking brake cable
3 Brake master cylinder
4 Left handlebar switch
5 Left grip warmer lead
6 Brake hose
7 Route the brake hose behind the
throttle cable and in front of the
corrugated tubes.
8 Route the corrugated tube
(engine stop switch lead, throttle
switch leads, right grip warmer
lead, and thumb warmer lead) in
front of the corrugated tube (left
grip warmer lead, grip/thumb
warmer adjustment switch lead,
brake light switch lead, and
headlight beam switch lead).
9 Fasten the wire harness and cor-
rugated tube (engine stop switch
lead, throttle switch lead, right
grip warmer lead, and thumb
warmer lead) to the headlight
stay with the plastic band, mak-
ing sure to route the tube to the
rear of the stay and the harness
to the rear of the tube.
0 To the wire harness
A Fasten the headlight unit lead
and speedometer unit sub-lead
to the headlight stay with the
plastic band.
B To the headlight (left)
C To the throttle body
D To the headlight (right)
E To the coolant reservoir
F To the parking brake
G To the brake caliper
H Fasten the wire harness and cor-
rugated tube (left grip warmer
lead, grip/thumb warmer adjust-
ment switch lead, brake light
switch lead, and headlight beam
switch lead) to the headlight stay
with the plastic band, making
sure to route the tube to the rear
of the stay and the harness to the
rear of the tube.
I Pass the corrugated tubes and
parking brake cable through the
guide.
J Right handlebar switch
K Right grip warmer lead
L Corrugated tube (engine stop
switch lead, throttle switch leads,
right grip warmer lead, and
thumb warmer lead)
M Throttle cable
6-14