Epson EMP-82 Setup Manual page 27

Red
Red Problem
Red
Red
Fan/Sensor problem
Red
Overheating
Red
Wait for 5 minutes
then unplug this
Red
projector.
Red
High temperature
warning
Orange
* If the problem is not corrected after checking the points above, unplug the projector and contact your
dealer.
Unplug the
projector and
contact your
dealer.
Check the following. *
• the projector is
not too close to
the wall.
• the air filters
are not blocked.
: Power : lit : flashing
General Lamp Problem
Remove the lamp and
Red check if it is broken. If it
is not broken, reinsert
Red
it.
If it is broken, contact
your dealer.
Lamp replacement
notification
Change the lamp. If
Orange
you continue to use the
lamp, it may explode.
: off
27