Cruise Control; Braking - Volvo 960 Owner's Manual

1993 Volvo 960

Cruise control

The cruise control switches are located on the turn signal switch lever.
To engage and set desired speed:
1. Set switch (B) to ON.
2. Accelerate to desired cruise speed.
NOTE:
The cruise control cannot be engaged at speeds below 22 mph (35
km).
3. Press the + or - area of the SET button (A) to set the desired speed.

Braking

This will automatically disengage the cruise control. Previously selected cruise speed is retained in the
memory and by momentarily setting the switch to RESUME position, that speed will be re-engaged.
If the cruise control is already engaged, the cruising speed can be increased or decreased by depressing
the SET button (A) towards either + or - . One short press on the button corresponds to a speed change
of approx. 1 mph (1.6 km/h). When the button is released, the vehicle will maintain the current speed.
If actual speed falls below 70% of set speed or if the wheels spin or lock, the cruise control will
disengage automatically.
file:///K|/ownersdocs/1993/1993_960/93960_1_6.html (7 of 8)12/30/2006 9:46:55 AM