Ap Mode Settings; Repeater Mode - Comfast CF-WR300N User Manual

(default name is "COMFAST")an "Pre‐shared key"(note: pre‐shared
key is same as the key of the SSID which you want to repeat)
2.Click"connect",set up waiting for 20 seconds, laptop/mobile
phone/pad etc. devices can search out the Repeater "SSID", type
the key to connect and get the Internet.
8、Wireless router mode
1.Choose"Router" mode as shown below, WAN Access Type default
type is "DHCP .Client(dynamic IP)"
2.PPPOE dial up setting: WAN Access Type choose PPoE, type the
User Name and Password which provide the SSID, Channel, Encryption
and key, click the "APPLY", set up waiting for 20 second.
3.Static IP setting: WAN Access Type choose Static IP, and type
the basic network parameters by ISP(Inter Service Provider), fill
up the SSID, Channel, Encryption and Key, click "APPLY", set up
waiting for 20 seconds.
Attention: Please choose WAN Access Type first before settings of
router mode.
9、 FAQ
1. If I forget the log in name and password of the device , what
should I do(how to reset the router)?
A. If you forget the log in name and password of the device, the only
way you can do is do factory reset to the device, then the log in name
and password will be restored to their default values. At the bottom
of the device there is a Reset button, when power is on, press and
hold the button for 10 seconds, after the indicator LED has blinked
3 times rapidly, release the button and finished the Reset operation.
2. What if i can't open the administrator page of device in browser?
A. Please make sure the IP address of your computer is in the same
network segment as the IP address of the device administrator page
you typed in browser: for example, if your device default log in IP
address is 192.168.10.1, then the IP address of your computer
should have been 192.168.10.x(x is any integer between 2 and 254):
B. Please make sure your browser setting is "Never dial a
connection" and disable proxy; Here is the steps of configuration
(suppose you use IE): Click "Tools"‐"Internet Options"‐"Connections",
choose" Never dial a connection"; Click "Lan settings", remove the
option of "Proxy server".
C. Try change another computer to log in: If all the 3 hints above
can't help you, please do the Factory Reset Operation to the device
and log in again.
3. Why my laptop can't search out the signal of Wi‐Fi SSID?
A. If your laptop has network adapter built‐in, please make sure the