Table of Contents
Advertisement
Quick Links
Manufacturer: Shenzhen Four Seas Global Link Network Technology Co., Ltd
1、 Product Specification
This device as a complement of wired LAN (local area network)
achieved the wireless access function of the wired LAN network,
plug‐and‐play. Suitable environments: Hotels, School
dormitories, House, Apartments, Buildings
Note: COMFAST mini repeater has two shape, please find
the corresponding description of the product according
to your item appearance.
WPS/Reset button:
WPS/Reset button is at the bottom of This device beside LAN/WAN
port. When power is on, press and hold the WPS/Reset button for
2 seconds, you will enable the WPS function, press and hold the
button for 10 seconds and release, then it is restoring the factory
value function the device will restore to factory settings.
Warning:
1.Please remove the device if it's the thunderstorm weather to
keep from lightning strikes
2.Keep away from heat source and keep ventilation.
3.Please pay attention to waterproof when it is in storing,
transporting and operating environment.
2、 Introduction of 3 Application Modes
2.1 AP Mode(Access Point)
This device as a complement of wired LAN(Local Area
Network),achieved the wireless access function of the wired LAN,
plug‐and‐play. Under this mode, the RJ45 wire port is being used
as LAN port, computer can connect with This device through wired
or wireless way. you have to set your computer' s IP address
manually if you want to log in the setting page.
2.2 Repeater Mode
User Guide
Wireless Repeater
M/N: CF‐WR300N
Trade Mark: COMFAST
Advertisement
Table of Contents
Related Manuals for Comfast CF-WR300N
Summary of Contents for Comfast CF-WR300N
- Page 1 M/N: CF‐WR300N Trade Mark: COMFAST Manufacturer: Shenzhen Four Seas Global Link Network Technology Co., Ltd 1、 Product Specification This device as a complement of wired LAN (local area network) achieved the wireless access function of the wired LAN network, plug‐and‐play. Suitable environments: Hotels, School dormitories, House, Apartments, Buildings Note: COMFAST mini repeater has two shape, please find the corresponding description of the product according to your item appearance. WPS/Reset button: WPS/Reset button is at the bottom of This device beside LAN/WAN port. When power is on, press and hold the WPS/Reset button for 2 seconds, you will enable the WPS function, press and hold the button for 10 seconds and release, then it is restoring the factory value function the device will restore to factory settings. Warning: 1.Please remove the device if it's the thunderstorm weather to ...
- Page 2 This device is used for extending the wireless signal's coverage of existing AP or wireless router. Under this mode, the RJ45 wire port is being used as LAN port, computer can connect with this device by wired or wireless signal. You should set your computer's IP address manually or press the reset button for restoration(note: after restoration, it is router mode by default, the computer must through wireless way log in the setting page) Application environments: Duplex houses, Large‐area places. 2.3 Router Mode This device has wireless router function, its wired RJ45 port used as WAN port, it can connect with ADSL modem by web cable, computer will get sharing network by connecting with This device through wireless way. Under this mode, the RJ45 wired port as WAN port, only through wireless way the computer can connect with This device, device's DHCP server is enabled by default, we suggest making the IP address and DNS address acquired automatically. Application environments: House, Apartments Note: In most cases, the network of holes or school dormitories adopt dynamic IP addressing, at this time, computer/wifi mobile phone/pad only need make their IP address and DNS address acquired automatically. In a few cases, the network is fixed IP address, need make the computer/wifi mobile phone/pad's IP address and DNS address same as the address which the network ...
- Page 3 4.If your computer's IP address sub net mask and default gateway were set manually, please revise them to "Automatically get the IP address "and" Obtain DNS server address automatically", then click "OK", previous interface also click "OK" 4、 Wireless Network Connection(Win 7 and XP) Windows 7 1.After the installation of the wireless adapter, bottom right corner will appear icon, click this icon. 2.From the pop‐up network list, please select the network which is to be connected, This device default SSID name is "COMFAST" select it and click "Connect" 3.In the first use, it will appear tips as below picture, please select "connect to the network without setting up the network", then click "OK" 4.When it shows “connected”, means that your computer has successfully accessed the wireless network Windows XP 1. After the installation of the wireless icon, click this icon 2.From the pop‐up network list, please select the network which is to be connected, This device default SSID name is ”COMFAST”, select it and 3.When the up right corner appears ”Connected’ mark, means that the computer has successfully accessed the wireless network. 5、 The Product Log in Interface ...
- Page 4 (default name is “COMFAST”)an “Pre‐shared key”(note: pre‐shared key is same as the key of the SSID which you want to repeat) 2.Click”connect”,set up waiting for 20 seconds, laptop/mobile phone/pad etc. devices can search out the Repeater ”SSID”, type the key to connect and get the Internet. 8、Wireless router mode 1.Choose"Router" mode as shown below, WAN Access Type default type is "DHCP .Client(dynamic IP)" 2.PPPOE dial up setting: WAN Access Type choose PPoE, type the User Name and Password which provide the SSID, Channel, Encryption and key, click the "APPLY", set up waiting for 20 second. 3.Static IP setting: WAN Access Type choose Static IP, and type the basic network parameters by ISP(Inter Service Provider), fill up the SSID, Channel, Encryption and Key, click "APPLY", set up waiting for 20 seconds. Attention: Please choose WAN Access Type first before settings of router mode. 9、 FAQ 1. If I forget the log in name and password of the device , what should I do(how to reset the router)? A. If you forget the log in name and password of the device, the only way you can do is do factory reset to the device, then the log in name and password will be restored to their default values. At the bottom ...
- Page 5 Wi‐Fi function is enabled(we recommend you connect the laptop vendor or read the laptop user manual); B. At device manager interface, check whether the driver of network adapter has been installed successfully; C. Check whether the wifi service has been turned on, right click the icon" my computer" on your desktop, choose manage. In "Computer Management" wizard, click"Services and A applications",then on the page of "Service", find the item "Wireless Zero Configuration" and check its Status value. D. Please make sure you've enabled the wifi capability and enabled SSID broadcast. E. Get closer to the router and try search again, Avoid the factor of obstacles which reduce the intensity of signal;If the hints above can't help you, please chick out whether another wireless network adapter can connected to the router. If it still don't work, please do the factory reset operation to resource the parameters back to their default values. 4. What if i forget the security password? A. Use network cable to connect the compute and the device, log in device administration page and check the wireless security settings B. Do the factory reset operation to the device, restore the parameters back to their default values. FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, ...
- Page 6 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located or operating in ...
Need help?
Do you have a question about the CF-WR300N and is the answer not in the manual?
Questions and answers