Advertisement
Quick Links
Advertisement
Related Manuals for ZComax AIRRUNNER CPE-2 Series
Summary of Contents for ZComax AIRRUNNER CPE-2 Series
- Page 1 C P E A I R R U N N E R CPE-25(x) Series OEM I NSTALLERS UICK TART UIDE...
- Page 2 Changes or modifications not expressly specifies that the cable ground approved by Zcomax Technologies, Inc. may should be connected to the void the user’s authority to operate the grounding system of the equipment.
- Page 3 conjunction with any other transmitter or antenna Check Product Contents. Configuration: Connections Check product for complete contents. o The PCMCIA Card is inserted into SBC, The following items should be included in the box. The PCMCIA rails are keyed so as to avert a a.
-
Page 4: Installation
Internal Router’s LAN port Netmask: ___________________ configure the product. Enable Internal DHCP server: YES ________ NO ______ a. On the Windows desktop, click on START|PROGRAMS|ZCOMAX CPE-250 Begin IP_________________ to start MANAGER/CPE-250 MANAGER the software. End IP__________________ b. Once started, the CPE-250... - Page 5 c. Double click on the CPE-250HP port radio buttons (WAN on WLA, product you wish to configure. WAN on ETH) to setup the LAN port. d. Enter “default” at the password q. A new windows pops over the prompt. current windows. Enter the Router's e.
- Page 6 IP address: 192.168.1.1; Default password: default). Telnet: Open a Telnet session at the product’s IP address (default IP address: 192.168.1.1; Default password: default). Copyright 2002 Zcomax Technologies, Inc. All rights reserved. P/N: QSG15-130. Rev 1.3 Zcomax and AirRunner are registered trademarks...