Connecting Input Source Players - VocoPro DA-3800 PRO Owner's Manual

Getting Connected cont.
Connecting to the REC OUT or LINE OUT jacks
The L/R (red and white) RCA Record Output or Line Output
jacks on the rear panel can be connected to any self-
powered input device with RCA inputs. (i.e. recording device,
powered speakers, etc)
What you will need:
• Powered device with L/R RCA inputs
• RCA L/R audio cable (red & white)
1. Connect one end of the red and white RCA cable to the
REC OUT jacks on the DA-3800 PRO's rear panel
2. Connect the other end of the red and white RCA cable
to the RCA inputs on the recording device, powered
speakers, etc.
������� ��� ���� �����
�� ������ ���������� ������
���������������
���
��� ��� �� ���
�����
�������� ��� ���� �����
���� ���
�������� ����� ���
�� ��� �����
������� ��� ���� �����
�� ������ ���������� ������
���������������
���
��� ��� �� ���
�����
����� ��� ������� ���
���������������� �������
����� ������������ ����
������ ���
������ ������� ��������
������� ������
��������� ��� ����
����� � ������
9
���� ���
�������� ����� ���
�� ��� �����
WARNING: TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK, DO
����
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE
CAUTION: TO
REDUCE THE
RISK OF FIRE,
REPLACE
ONLY WITH
CAUTION: TO PREVENT ELECTRIC
SAME TYPE
SHOCK, DO NOT REMOVE COVER
SCREWS. NO USER-SERVICEABLE FUSE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
�� �������
��������
110V
�������
�����
�� �����
220V
THE POWER
SUPPLY CORD
SHOULD BE
DISCONNECTED
BEFORE
CHANGING THE
����������
VOLTAGE
�������
SELECTOR
����� ��� ������� ���
���������������� �������
����� ������������ ���
������ ���
������� �����
��������� ��� ��
����� � ������