Operation - Toro 25497 Installation Instructions Manual

Operation

Adjusting the Tilt Steering
Column
1. Stop the machine and set the parking brake.
2. Hold the steering wheel with 1 hand.
3. Press the latch mechanism (located under the word
P that is embossed in the boot of the steering
USH
column) until the column unlocks
1. Latch mechanism—P
USH
4. Move the steering wheel to the desired position.
5. Release the latch mechanism and ensure that the
steering column is locked in position
(Figure 11).
Figure 11
(embossed in the boot)
(Figure 11).
5