Troubleshooting - Toro 23102 Operator's Manual

Troubleshooting

Problem
The cultivator does not operate.
Possible Cause
1. A hydraulic coupler is not completely
connected.
2. A hydraulic coupler is damaged.
3. There is an obstruction in a hydraulic
hose.
4. A hydraulic hose is kinked.
5. The auxiliary valve on the traction unit
is not opening.
6. A hydraulic valve or the drive motor is
damaged.
7. There is an obstruction in the cultivator
(eg, rock or root).
8. The drive chain is loose.
9. The drive chain is broken.
13
Corrective Action
1. Check and tighten all couplers.
2. Check the couplers and replace any
that are damaged.
3. Find and remove the obstruction.
4. Replace the kinked hose.
5. Repair the valve.
6. Contact your Authorized Service
Dealer.
7. Find and remove the obstruction.
8. Adjust the chain tension.
9. Repair or replace the chain.