Table of Contents
Advertisement
•
Never tamper with safety devices. Check their proper
operation regularly.
•
Keep the machine free of grass, leaves, or other debris.
Clean up oil or fuel spills and remove any fuel-soaked
debris. Allow the machine to cool before storing.
•
If you strike a foreign object, stop and inspect the
machine. Repair the machine, if necessary, before starting.
•
Never make any adjustments or repairs with the engine
running. Disconnect the spark-plug wire and ground
against the engine to prevent unintended starting.
Safety and Instructional Decals
Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Height of cut
1. Height of cut
1. Engine switch Off
2. Engine switch On
108-7450
108-7451
110-9457
3. Unlocked
4. Locked
•
Check the grass catcher components and the discharge
guard frequently and replace them with manufacturer's
recommended parts when necessary.
•
Mower blades are sharp. Wrap the blades or wear gloves,
and use extra caution when servicing them.
•
Do not change the engine governor setting or overspeed
the engine.
•
Maintain or replace safety and instruction labels as
necessary.
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting/dismemberment of hand or foot—stay away from
moving parts.
3
112-8760
Advertisement
Table of Contents
