CAN FL Series Installation, Use And Maintenance Instruction Manual page 68

GAS HOB UNITS COMBINED WITH RECESSED SINK ▪
OPERATING FAULTS
The following situations are considered operating faults and require the intervention of the Assistance
Service if:
▪
The burner flame is yellow.
▪
Soot is formed on the cooking utensils.
▪
The burners do not light correctly.
▪
The burners do not remain lit.
▪
The burners go out when the kitchen doors are opened or closed.
▪
It's difficult to turn the gas valves.
If the appliance does not work properly, contact the authorised local Assistance Service.
WHAT TO DO IN CASE OF MALFUNCTIONING
Before contacting the nearest Assistance Centre, carry out the following operations:
▪
check that the hob unit is correctly connected to the system;
▪
check that the hob unit is correctly powered;
▪
find the appliance data on the CE plate bearing the product's serial number;
▪
find the date and a suitable document (invoice or till receipt) certifying purchase of the appliance.
ATTENTION!
While waiting to solve the problem, the appliance should not be used and should be
disconnected from all the systems it is connected to.
Do not try to repair or modify the appliance.
CAN S.r.l. will give you the maximum collaboration and assistance should any technical or other
type of problems arise on any of its products.
For any information or assistance request, contact the nearest dealer or contact CAN S.r.l.
68
FL series