Samsung SC07F50 Series User Manual page 20

troubleshooting
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind
fully.
Vacuum cleaner dows not
pick up dirt.
Low or decreasing
suction.
Body overheating.
Static electicity
discharge.
This Vacuum cleaner is approved the following.
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
20_ troubleshooting
SOLUTION
• Check cable, plug and socket.
• Leave to cool.
• Check for blockage and remove.
• Pull the cord out 2-3 m and push down the cord rewind button.
• Check hose and replace if required.
• Please check fi lter and, if required, clean as illustrated in the
instructions. if fi lters are out of condition change them to new ones.
• Please check fi lters, if required clean as illustrated in the instruction.
• Please decrease power suction.
• This can also occur when air in the room is very dry.
Please ventilate the room to air humidity become a normal.