System Settings - Vizualogic A-1285/6 Owner's Manual

Press SETUP on the Remote Control to enter the system setting menu.
Current Item
Current Item
On the Remote Control, press either the  UP or  DOWN or  LEFT or
RIGHT arrow buttons to move to the desired menu item and press PLAY to
select the menu item.
set TV Display mode to the correct ratio:
• Press the  rIGHT arrow buttons to enter the sub-menu. If you want
to set the screen to "WIDE", press the  DoWn arrow twice to move
your selection until the "WIDE" item is selected, press enTer to select.
• Press seTup to exit these system settings.
noTe: There are three (3) screen ratio modes available: 16:9 WIDE, 4:3LB
(Letter Box) and 4:3PS (Pan Scan). Different disc formats will display
different images depending on the screen setting and size used. Here is an
example of the different screen ratio format.

sysTem seTTInGs


--G EN ERA L S ETU P P A G E --
TV Display
angle Mark
OsD language
CapTiOns
sCreen saVer
lasT MeMOry

GOTO GENERAL SETUP PAGE
-- G EN ERA L S ETU P P A GE - -
TV Display
angle Mark
OsD language
CapTiOns
sCreen saVer
lasT MeMOry
GOTO GENERAL SETUP PAGE
WiDe
On
eng
Off
On
On
ps 4:3 pansCan
On 4:3 leTTerbOx
eng 16:9
Off
On
On
11
™