Vacron VDH-SXB804 Manual
  1. Manuals
  2. Brands
  3. Vacron Manuals
  4. DVR
  5. VDH-SXB804
  6. Manual

Vacron VDH-SXB804 Manual

4ch 1080p / 8ch 720p sdi hybrid dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4CH 1080P / 8CH 720P
SDI Hybrid DVR
2013 NOV V1.0

Advertisement

Table of Contents
loading

Related Manuals for Vacron VDH-SXB804

Summary of Contents for Vacron VDH-SXB804

  • Page 1 4CH 1080P / 8CH 720P SDI Hybrid DVR 2013 NOV V1.0...

  • Page 2: Table Of Contents

    CONTENTS Foreword 【Notices】 ........................1 【DVR System Operation】 ..................2 Function Illustration ..................2 Quick Guide ..................... 4 Main Menu ....................5 2.1.1 Record ......................5 2.1.2 Alarm ......................10 2.1.3 System ...................... 20 2.1.4 Advanced ....................52 2.1.5 Info ......................57 2.1.6 Logout ......................

  • Page 3: Foreword 【Notices

    Foreword 【Notices】 WARNING  Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the performance of DVR and damage the machine.  Do not touch the power plug or case with wet hands as this could result electric shock.

  • Page 4: Dvr System Operation

    A. 【 】 DVR System Operation Function Illustration After logo in system, it will ask users whether enable Cloud? If not, it will  ask every time after rebooting the system. Please select the option “Will no longer be prompted” to avoid it. After complete configuration, system will show multiple split screens.
  • Page 5 The Default login name: admin, password: (NONE)  Select View 1 for monitoring Single screen, optional CAM01~8single  screen. Select View 4 for monitoring 4 screens, optional CAM1~4 ,4, CAM5~8. ...

  • Page 6: Quick Guide

    Select View 8 for monitoring 8 screens, 8 split screen.  Select View 9 for monitoring 9 screens, 9 split screen.  Quick Guide Right click the mouse, select Main Menu and it will pop out.

  • Page 7: Main Menu

    Main Menu Path: Quick Guide / Main Menu  2.1.1 Record Path: Main Menu /  Record ：Record. Record  Cont / PlayBack /Backup...
  • Page 8 2.1.1.1 Record Cont Path: Main Menu /  Record / Record Cont ：Configure the  recording time. Channel: click drop down menu of channel. You can setup single channel or all channels; the default setup will be channel 1. RAID: you can copy all data to another when you connect two HDD; the default setup will be “uncheck”.
  • Page 9 2.1.1.2 PlayBack Path: Main Menu / Record / PlayBack  ：Search for and playback recorded video files.  Playback button select date and play channel then click play, it will start playback. Back forward Rewind Play Video Stop Stop video playback 4 speed options: 1X、2X、3X、4X.
  • Page 10 Click repeat icon becomes to , repeat same file. button Click full screen enlarge the image. Click one more time back to normal. button Click scissors Press Cut will become . Selecting how long you want and button press again .
  • Page 11 2.1.1.3 Backup  Path: Main Menu / Record / Backup ：Backup files to  backup device. ：Plug in USB storage device, click detect to search USB storage which will be shown in window. ： ❶ ❷ ❺ ❸ ❻ ❹ ❼...

  • Page 12: Alarm

    ：Format selected USB storage device. ：While backup, click stop icon to stop backup. 2.1.2 Alarm Path: Main Menu /  Alarm ：Motion Detect /  Video Blind / Video Loss / Alarm Input / Alarm Output / Abnormality / Intelligent...
  • Page 13 2.1.2.1 Motion Detect Path: Main Menu /  Alarm / Motion Detect ：Configure all  video detection parameters: active area a). Channel：setup ch1~ ch 8 for individual settings, also can setup for all channels. b). Enable：Select to setup for the Motion Detect functions; default value is Off.
  • Page 14 Tour：Channel pops out after alarm is triggered. If select all channels, it jumps from Ch 1 to ch 8 in sequence; default value is Off. k). PTZ Activation：Setup the PTZ function from Ch1 ~ Ch8. Record delay ： The recording duration after the buzzer being triggered.
  • Page 15 a). Channel：setup ch1~ ch 8 for individual settings, also can setup for all channels. b). Enable ： Select to setup for the Video Blind functions; default value is Off. c). Sensitivity：Set the sensitivity level, from lowest、lower、 middle、higher、much higher、highest, 6 options. Default value is middle.
  • Page 16 2.1.2.3 Video Loss Path: Main Menu /  Alarm / Video Loss ：Settings for  video loss detect parameters. a). Channel：setup ch1~ ch 8 for individual settings, also can setup for all channels. b). Enable：Select to setup for the Video Loss functions; default value is Off.
  • Page 17 Show message：Setup for a prompt message show on the screen when Video Loss is triggered; default value is Off. k). Send Email：Setup to send triggered photos to assigned email address when Video Loss is triggered; default value is Off. Buzzer：Setup for buzzer beeping after Video Loss is triggered;...
  • Page 18 Tour：Channel pops out after Alarm Input is triggered. If select all channels, it jumps from Ch 1 to ch 8 in sequence; default value is Off. PTZ Activation：Set the PTZ function from Ch1 ~ Ch8. k). Record Delay：The recording duration after the buzzer being triggered Alarm Input.
  • Page 19 2.1.2.6 Abnormality Path: Main  Menu/Alarm /Abnormality ：Abnormal  parameter setup. a). Event Type：Optional: No Disk, Disk Error, Disk No Space, Net Disconnection, IP conflict…etc. b). Enable ： Select to setup for the Abnormality function; default value is Off. c). Show message：Setup for a prompt message show on the screen when Abnormality is triggered;...
  • Page 20 b). Enable：Select to setup for Intelligent functions; default value is Off. c). Algorithm：3 options: Perimeter alert, Items care, Video Diagnosis. d). Rule：click “Set” get into, setup whether to Show Traces, Sensitivity: Higher, middle, low. Move scroll bar for Minimum moving distance. 1) Cordon: set from left to right or from right to left will triggered alarm.
  • Page 21 e). Alarm Output：According to the settings to trigger Intelligent analysis; default value is Off. Delay: A time period to record after triggering Intelligent analysis, option: 0 ~ 3000 Sec; default value is 10 Sec. g). Record Channel：select which channel to record after Intelligent Analysis is triggered;...

  • Page 22: System

    2.1.3 System Path: Main Menu /  System ：System Config.  General / Encode / Network / NetService / GUI Display / PTZ Config / RS232 / Tour /Spot Set / Digital 2.1.3.1 General Path: Main Menu /  System /General ：Configure Time, ...
  • Page 23 input Password to access Menu, options: 0 ~ 60 Min, 0 means no Password required; default value is 0. Machine Name：Setup the Name of DVR, maximum 32 characters；default value is LocalHost. Daylight Saving Time：Set Day of Week (Figure 22) & Date(Figure 23), it will add 1 hour for assigned time.
  • Page 24 Quality: Lowest, low, normal, high, very high, highest are the available options; default: high. Bit Rate (kb/s): In accordance by the selected resolution and frame rate; the setting is default. I Frame Interval: 2~12 are available to be selected Video/Audio: To select Video/Audio: On/Off; default: Video: On &...
  • Page 25 i) HTTP Port：Input HTTP Port; default value is 80. j) HS Download: When checked this option, you can only use high-speed transmission; default is unchecked. k) Transfer Policy：Options: Adaptive、Quality Preferred、Fluency Preferred; default value is Quality Preferred. 2.1.3.4 NetService Main Menu / System / ...
  • Page 26 Email setting: you can use Email function when you check it. ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽ 1) SMTP Server: enter SMTP of the mail. For example, gamil will enter smtp.gmail.com; default setting will be Your SMTP Server. 2) Port: enter Port of the mail.
  • Page 27 To erase IP, check the IP address and click delete, the IP will be deleted. DDNS : this function will be enabled to operate after check it. DDNS Type: CN99、DynDns、Oray、 NO-IP、MYQ-SEE, five types; default setting will be CN99. Domain Name:Enter the registered DDNS URL;...
  • Page 28 g) ARSP: enter server of ARSP; default setting will be disable. h) Alarm Server: this function will be enabled to operate after check ❶ ❷ ❸ ❹ ❺ ❻ ❼ 1) Protocol type: GENERAL 2) Server Name: Enter IP of Server or Domain Name; default setting will be AlarmServer.
  • Page 29 Wireless Config: will be able to connect to network via USB 3G SIM card after check it. ❶ ❷ ❸ ❹ ❺ ❻ 1) Type: Auto、TD-SCDMA、WCDMA、CDMA1.X、GPRS、EVDO; default will be EVDO. 2) Wireless AP: enter wireless AO of 3G SIM card; default will be ChinaNet.
  • Page 30 UPNP: it will don’t need a port for remote monitor via IE when using router. It will operate when router has this function; default setting will be disable. Wifi: connect USB Dongle will be able to connect to WIFI after check;...
  • Page 31 RTSP: for RTSP function; default setting will be disable. Port: will need to enable Port if you use router. Thus you will be able to remote monitor when using a non-IE browser. Cloud: will be able to use this service when you check it. MTU: enter Byte of MTU;...
  • Page 32 Time Display：Select to display time; default value is On. Channel Title：Select to display channel titles; default value is On. Record Status：Select to display record status; default value is On. Alarm Status：Select to display alarm status；default value is On. Deflick：Prevent images flicking; default value is On. Transparency：Adjust the transparency of dialogue GUI.
  • Page 33 2.1.3.6 PTZConfig  Path: Main Menu / System / PTZ Config ：PTZ Config  Channel：Select Ch 1 ~ 8. Protocol：22 options can select; default value is PELCOD. Address：PTZ address Number; default value is 1. Baud rate：8 options can select; default value is 9600. Data Bits : 4 options can select;...
  • Page 34 2.1.3.8 Tour  Path: Main Menu / System / Tour ：Setting for  touring parameters. Enable Tour：Enable the auto switching tour function; default value is Off. Interval ： Set the switching tour time, min 5 Sec, max 120 Sec; default value is 5 Sec.
  • Page 35 is Off. Interval ： Set the switching tour time, min 5 Sec, max 120 Sec; default value is 5 Sec. View 1：Set single screen for each switch tour. View 4：Set 4 screens for each switch tour. View 9：Set 9 screens for each switch tour; default value is All open. 2.1.3.10 Digital ...
  • Page 36 1) Normal Recording To select this mode, it can be recorded as 8 Channels SDI camera with 720P resolution, the max. playback channels: 2 channels; the system will restart, once the channel type had been selected. 2) Hybrid(SDI+IP Cam) To select this mode, it can be recorded as 6 Channels SDI Camera with 720P resolution and 2 Channels IP Camera with 1080P resolution, the max.
  • Page 37 Once the network recording mode had been setup, After restart the system, “Channel Type” and “Channel status” will appear. Digital channels  Path: Main Menu / System / Digital channels ：The  recording status for IP Camera or DVR will be available.
  • Page 38 Enable: To activate the designated channel; default is unchecked. Time synchronization: After checking, the timing of IP Cam and DVR will be synchronized Decode Order: To select the transmission type by the priority of real-time video image status; default is Middle Connection Mode: Single connection and multi-link;...
  • Page 39 Port: Display the chosen IP-Cam or DVR Port. Username: Input the account name of IP-Cam or DVR; default: admin. Password: Input the password of IP-Cam or DVR; default: (blank). Channel status  Path: Main Menu / System / Channel status ：The ...
  • Page 40 After restart, click system then enter Digital icon, “Channel status” and “ChannelType” icons will appear. Digital channels, Channel status, and ChannelType in sequence. Digital channels  Path: Main Menu / System / Digital channels ：The  recording status for IP Camera or DVR will be available.
  • Page 41 Time synchronization: After checking, the timing of IP Cam and DVR will be synchronized. Decode Order: To select the transmission type by the priority of real-time video image status; default is Middle. Connection Mode: Single connection and multi-link; multiple IP cam or DVR can be connected in multi-link mode, can also be played in sequence;...
  • Page 42 admin Password: Input the password of IP-Cam or DVR; default: (blank). Channel status  Path: Main Menu / System / Channel status ：The  recording status for IP Camera or DVR will be available. Click on this option, it meant 4 channel 720P SDI Camera, 2 channel 1080P IP-Cam, 2 channels 720P IP-Cam can be recorded;...
  • Page 43 After restart, click system then enter Digital icon, “Channel status” and “ChannelType” icons will appear. Digital channels, Channel status, and ChannelType in sequence. Digital channels  Path: Main Menu / System / Digital channels ：The  recording status for IP Camera or DVR will be available.
  • Page 44 Time synchronization: After checking, the timing of IP Cam and DVR will be synchronized. Decode Order: To select the transmission type by the priority of real-time video image status; default is Middle. Connection Mode: Single connection and multi-link; multiple IP cam or DVR can be connected in multi-link mode, can also be played in sequence;...
  • Page 45 admin. Password: Input the password of IP-Cam or DVR; default: (blank). Channel status  Path: Main Menu / System / Channel status ：The  recording status for IP Camera or DVR will be available. Click on this option, it meant 4 channel 720P SDI Camera, 1 channel 1080P IP-Cam, 4 channels 720P IP-Cam can be recorded;...
  • Page 46 After restart, click system then enter Digital icon, “Channel status” and “ChannelType” icons will appear. Digital channels, Channel status, and ChannelType in sequence. Digital channels  Path: Main Menu / System / Digital channels ：The  recording status for IP Camera or DVR will be available.
  • Page 47 Time synchronization: After checking, the timing of IP Cam and DVR will be synchronized. Decode Order: To select the transmission type by the priority of real-time video image status; default is Middle Connection Mode: Single connection and multi-link; multiple IP cam or DVR can be connected in multi-link mode, can also be played in sequence;...
  • Page 48 admin. Password: Input the password of IP-Cam or DVR; default: (blank). Channel status  Path: Main Menu / System / Channel status ：The  recording status for IP Camera or DVR will be available. Click on this option, it meant 2 channels 720P SDI Camera, 2 channels 1080P IP-Cam, 4 channels 720P IP-Cam can be recorded;...
  • Page 49 After restart, click system then enter Digital icon, “Channel status” and “ChannelType” icons will appear. Digital channels, Channel status, and ChannelType are in sequence. Digital channels  Path: Main Menu / System / Digital channels ：The  recording status for IP Camera or DVR will be available.
  • Page 50 Time synchronization: After checking, the timing of IP Cam and DVR will be synchronized. Decode Order: To select the transmission type by the priority of real-time video image status; default is Middle. Connection Mode: Single connection and multi-link; multiple IP cam or DVR can be connected in multi-link mode, can also be played in sequence;...
  • Page 51 admin. Password: Input the password of IP-Cam or DVR; default: (blank). Channel status  Path: Main Menu / System / Channel status ：The  recording status for IP Camera or DVR will be available. Click on this option, it meant 9 channels 720P IP-Cam can be recorded;...
  • Page 52 After restart, click system then enter Digital icon, “Channel status” and “ChannelType” icons will appear. Digital channels, Channel status, and ChannelType are in sequence. Digital channels  Path: Main Menu / System / Digital channels ：The  recording status for IP Camera or DVR will be available.
  • Page 53 Time synchronization: After checking, the timing of IP Cam and DVR will be synchronized. Decode Order: To select the transmission type by the priority of real-time video image status; default is Middle. Connection Mode: Single connection and multi-link; multiple IP cam or DVR can be connected in multi-link mode, can also be played in sequence;...

  • Page 54: Advanced

    admin Password: Input the password of IP-Cam or DVR; default: (blank) Channel status  Path: Main Menu / System / Channel status ：The  recording status for IP Camera or DVR will be available. 2.1.4 Advanced Path: Main Menu / ...
  • Page 55 2.1.4.1 Storage Path: Main Menu /  Advanced /Storage ：HDD data  management. a) Read/Write：Set HDD enable to Read & Write. b) Read Only：Set HDD enable to read only. c) Redundant：only when there are 2pcs more HDDs for recording same information, and then can enable this function. d) Format Disk：Format HDD.
  • Page 56 h) Update: After adding, deleting, or modifying, please click update. 2.1.4.3 Online User Path: Main Menu /  Advanced /Online User ：Display how  many current online users. 2.1.4.4 Output Adjust Path: Main Menu /  Advanced /Output Adjust ：Adjust the ...
  • Page 57 OUT. f) Brightness: Adjustable TV, VGA, HD OUT brightness scale from 0 to 100; default is 44. g) Contrast: adjustable TV, VGA, HD OUT contrast, a scale from 0 to 100; default is 43. h) Saturation: Adjustable TV, VGA, HD OUT saturation scale from 0 to 100;...
  • Page 58 2.1.4.6 Restore Path: Main Menu /  Advanced / Restore ：Restore system  parameters to the factory default. 2.1.4.7 Upgrade Path: Main Menu /  Advanced / Upgrade ：Upgrade  software for this device. 2.1.4.8 Device Info Path: Main Menu / ...

  • Page 59: Info

    2.1.4.9 転入/転出  Path: Main Menu / Advanced / Import/Export ：Export  current log settings, import the new settings. 2.1.5 Info  Path: Main Menu / Info ：Display system  statistics: Harddisk status; current online. 2.1.5.1 HDD Info Path: Main Menu / ...
  • Page 60 ：Select this to show the recording time for HDD. 2.1.5.2  Path: Main Menu / Info / BPS ：Display the  statistics of current image BPS. 2.1.5.3  Path: Main Menu / Info / LOG ：Records of DVR  LOG message.

  • Page 61: Logout

    2.1.5.4 Version Path: Main Menu / Info  / Version ：Display current  system version and serial no. 2.1.6 Logout Path: Main Menu /  Logout ：System will show  logout/shutdown/reb oot. ：Logout current account, you can login with another account.

  • Page 62: Playback

    PlayBack  Path: Main Menu/ PlayBack  For more details, please see the previously description of “PlayBack”. PTZ Control  Path: Main Menu/ PTZ control  Setting for PTZ.

  • Page 63: Highspeedptz

    HighSpeedPTZ  Path: Main Menu/ HighSpeedPTZ  Use mouse to control the camera’s direction of PTZ during the display. Alarm Output  Path: Main Menu/ Alarm Output  For more details, see the previously description of “Alarm Output”. Output Adjust ...

  • Page 64: Logout

    Logout  Path: Main Menu/ Logout  For more details, see the previously description of “Logout”.
  • Page 65 For More Information Please check VACRON Website http://www.vacron.com Made in Taiwan...

This manual is also suitable for:

Vdh-sxb808

Table of Contents