Table of Contents
Advertisement
Chapter 1. Appliance safety precautions
Observe physical, electrical, and electronic component safety precautions.
DANGER:
An electrical outlet that is not correctly wired could place hazardous voltage on the
metal parts of the system or the devices that attach to the system. It is the responsibility of the
customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
(D004)
DANGER:
Hazardous voltage present. Voltages present constitute a shock hazard, which can cause
severe injury or death. (L004)
Important: The enclosure must be mounted in a rack.
Safe handling
Handle the enclosure with care.
v An unpopulated enclosure can weigh up to 45kg (100lb). Use appropriate lifting methods.
v A fully populated enclosure weighs 135kg (298lb). Only lift the enclosure when the drawers are empty
and latched closed. Do not attempt to lift the enclosure when populated with drives.
v Do not lift the enclosure by the handles on the rear modules. They are not designed to take the weight.
Only lift from underneath the main chassis.
v When closing the drawers, do so firmly, ensuring the latches are engaged.
Safety
v This equipment is for installation in a restricted access location only.
CAUTION:
If this equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment might be impaired.
v All rear modules are part of the fire enclosure and must only be removed when a replacement can be
immediately added. The system must not be run without all modules in place.
v Unplug the unit before you move it or if you think it has become damaged in any way.
v A safe electrical ground connection must be provided to the power supply cords.
Important: The enclosure must be grounded before applying power.
v The plug on the power supply cord is used as the main disconnect device. Ensure that the socket
outlets are located near the equipment and are easily accessible.
© Copyright IBM Corp. 2016, 2018
1
Advertisement
Table of Contents
