Compro Technology TN2200 User Manual page 24

Compro TN2200 - User's Manual
5. Choose to have the camera obtain IP
address automatically (DHCP) or man-
ually assign its IP address. Then set the
connection port and local power line
frequency settings (not available for
change when C4Home service is en-
abled).
6. Select the orientation of your IP cam-
era between Wall Mount or Ceiling
Mount. You can also change the ori-
entation setting later via the camera's
browser interface.
7. (Skip here if you didn't enable C4Home
service.) You need to login to your
C4Home account. If you don't have a
C4Home account yet, choose to create
a C4Home account and continue with
account registration.
3-12 Installing Camera Software
Figure 3-23. Device IP Obtain
Figure 3-24. Flip Mode Selection
Figure 3-25. C4Home Account