1. Manuals
  2. Brands
  3. voptech Manuals
  4. IP Phone
  5. VI2010
  6. User manual

voptech VI2010 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1 Introduction....................................................................................................................................... 3
1.1 Hardware Overview...............................................................................................................3
1.2 Software Overview................................................................................................................3
2 Keypad interface for IP Phone demo system................................................................................... 4
2.1 Keypad description................................................................................................................4
3 Setup the VoIP Phone by Web Browser........................................................................................... 5
3.1 Login......................................................................................................................................5
3.2 System Information for the VOIP PHONE. ...........................................................................5
3.3 Network.................................................................................................................................6
3.4 SIP Settings...........................................................................................................................9
3.5 Update.................................................................................................................................10
3.6 Reboot.................................................................................................................................10
4 Appendix:.........................................................................................................................................11
4.1 How to use the FXO port..................................................................................................... 11
4.2 Keypad Function and setting List........................................................................................13
VI2010
VoIP Phone User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VI2010 and is the answer not in the manual?

Questions and answers

Related Manuals for voptech VI2010

Summary of Contents for voptech VI2010

  • Page 1: Table Of Contents

    VI2010 VoIP Phone User Manual 1 Introduction............................3 1.1 Hardware Overview.......................3 1.2 Software Overview........................3 2 Keypad interface for IP Phone demo system................... 4 2.1 Keypad description........................4 3 Setup the VoIP Phone by Web Browser................... 5 3.1 Login............................5 3.2 System Information for the VOIP PHONE................5 3.3 Network..........................6...

  • Page 2: Introduction

    1 Introduction This user’s manual is for VoIP Phone. This user’s manual will explain the keypad instruction, web configuration and command line configuration for the VoIP Phone. Before using the VoIP Phone, some setup processes are required to make the VoIP Phone work properly. Please refer to the Setup Menu for further information. 1.1 Hardware Overview The VoIP Phone has the following interfaces for Networking, telephone interface, LED indication, and power connector.

  • Page 3: Setup The Voip Phone By Web Browser

    “5”, “j”, “k”, “l”, “J”, “K”, “L” “6”, “m”, “n”, “o”, “M”, “N”, “O” “7”, “p”, “q”, “r”, “s”, “P”, “Q”, “R”, ‘S” “8”, “t”, “u”, “v”, “T”, “U”, “V” “9”, “w”, “x”, “y”, “z”, “W”, “X”, “Y”, “Z” “0”, “space” “*”, “•”, “:”, “@”...

  • Page 4: System Information For The Voip Phone

    3.2 System Information for the VOIP PHONE. 3.2.1 When you login the web page, you can see the VOIP PHONE current system information like firmware version, company… etc in this page. 3.2.2 Also you can see the function lists in the left side. You can use mouse to click the function you want to set 3.3 Network 3.3.1 In Network you can check the Network status, configure the WAN Settings, LAN Settings, DDNS settings and VLAN Settings.
  • Page 5 3.3.3 WAN Settings: In this page you can configure the IP Phone WAN port’s setting. The WAN port is for you to connect to the ADSL Router, Broadband Router. Also you can use PPPoE to get the WAN IP address from your ISP.
  • Page 6 3.3.4 LAN Settings: In this page you can configure the IP Phone LAN port’s setting. 3.3.4.1 The LAN port’s default IP address is 192.168.123.1, Net Mask is 255.255.255.0., and DHCP Server enabled. The start IP address if 150, end IP adress is 200. It is not necessary to change the LAN settings. 3.3.4.2 You can connect your PC to the LAN port, set your PC as DHCP Client mode, then you can get IP addreess from the TA.

  • Page 7: Sip Settings

    3.4 SIP Settings 3.4.1 In SIP Settings you can setup the Service Domain, Port Settngs, Codec Settings, Codec ID Settings, RTP Setting, RPort Setting and Other Settings. If the VoIP service is provided by ISP, you need to setup the related informations correctly then you can register to the SIP Proxy Server correctly.

  • Page 8: Update

    3.5 Update 3.5.1 In Update you can update the VoIP Phone’s firmware to the new one or do the factory reset to let the VoIP Phone back to default setting. 3.5.2 In New Firmware function you can update new firmware via HTTP in this page. You can ugrade the firmware by the following steps: 3.5.2.1 Select the firmware code type, Risc or DSP code.

  • Page 9: Reboot

    Reboot button, then the VoIP Phone will automatically. 4 Appendix: 4.1 How to use the FXO port (Just for VI2010) First, you can dial 0* switch IP to PSTN. You can use the call forward setting forward the call from IP to PSTN or from PSTN to IP.

  • Page 10: Keypad Function And Setting List

    You can set the Auto Answer function to answer the incoming call by the phone. If the call is come from the IP, then the TA can let user to redial the call to PSTN phone number. If the call is coming from PSTN, then the TA can let user to redial to IP Phone number.
  • Page 11 4.2.3.1.2 Busy Forward. Activation: To Enabled/Disabled this function. Number: Forward to a Speed Dial Number. 4.2.3.1.3 No Answer Forward. Activation: To Enabled/Disabled this function. Number: Forward to a Speed Dial Number. 4.2.3.1.4 Ring Timeout: Set the Ring times to start the no answer forward function, ex: 2 means after 2 rings then forward to the dedicated number.
  • Page 12 4.2.4.2 LAN Setup 4.2.4.2.1 Bridge 4.2.4.2.2 NAT 4.2.4.3 DNS 4.2.4.3.1 Primary DNS 4.2.4.3.2 Secondary DNS 4.2.4.4 VLAN 4.2.4.4.1 Activation 4.2.4.4.2 VID: VID 2~4094 4.2.4.4.3 Priority: 0~7 4.2.4.4.4 CFI: 0~1 4.2.4.5 Status: Show WAN, LAN IP address and MAC address 4.2.5 SIP Settings If you want to use Kaypad to set the SIP setting, you have to go to item 7 (Administrator) System Authent to input the password, or you can not change the SIP setting.
  • Page 13 4.2.5.3.2 Duplicate RTP No duplicate One duplicate Two duplicate 4.2.5.4 RPort Setting: RPort Enabled/Disabled 4.2.5.5 Hold by RFC 4.2.5.6 Status: Show the SIP Proxy register status. You can use UP/Down key to check each Realm’s status. First Realm Second Realm Third Realm 4.2.6 NAT Transversal 4.2.6.1 STUN setting...

Table of Contents