Satcube Ku User Manual page 35

The C/N value is zero for all
orientations
Polarization value showing +45
degrees from "Zero position"
Wrong settings in satellite
profile or modem profile
The antenna elements inside
the antenna are shifted 45
degrees
SATCUBE PROPRIETARY
Satcube Ku User Manual v2.0-2019
Try one of the following:
1. Check selected satellite and
ensure correct frequencies
and LOs set in terminal GUI
and in modem
2. Check RQ value and use
instead if C/N is needed
during pointing.
3. Check line of sight
4. Check Magnetic Field value
in GUI under status. Typ:
50-80μT if >100μTthere is
most likely significant
interference and changing
terminal location is
advised. That allows for
more accurate pointing
values
5. Check correct GPS position
is entered or has been
found
6. [UHP-modem] Check SNMP
IP-settings of modem
(192.168.222.222). Should
be set to Terminal IP:
192.168.222.219
This is perfectly normal.