Satcube Ku User Manual page 27

•
ORIENTATION: Current pointing angles.
•
MAGNETIC FIELD: Measured magnetic field around the terminal. NOTE: High readings (above
100 µT) is an indication that pointing will be significantly affected and an alternative location
should be found.
•
CALIBRATION: If this button is present it means that the terminal has not been calibrated
with the updated calibration sequence. Please click the button and follow the instructions.
•
POSITION: Terminal's current latitude/longitude.
•
METHOD/GPS STATUS: Whether coordinates have been entered manually and built-in GPS is
disconnected.
•
GPS SATELLITES: Number of visible GPS satellites.
•
ACTIVE WARNINGS: Indicates whether system is experiencing any errors. GPS status
monitors the built-in GPS. BUC/LNB status monitors the uplink/downlink (Block
UpConverter/Low Noise Block downconverter).
Figure 30 Web GUI status page for advanced monitoring of the terminal system.
•
CALENDAR: displays current date and time
•
TEMPERATURES: Current temperatures for system processor, Inertial Measurement Unit,
BUC and LNB.
•
VOLTAGES: Current voltages for modem, cooling fans, LNB and RF detector.
•
BUC and LNB: indicate whether uplink/downlink are active together with current values for
Current and REF10.
SATCUBE PROPRIETARY
Satcube Ku User Manual v2.0-2019