Table of Contents
Advertisement
(1) PCI Express connector
Connector to be inserted into the PCI Express slot of the computer.
This product is connectable to a PCI Express x4, x8 or x16 slot.
Hint
(2) Bracket
Bracket to fix this product to the extended slot of Computer.
When fixing this product to a PCI Express slot optimized for the low profile type,
replace the bracket with the attached low profile one.
Hint
(3) Fibre Channel Connector (Port0/Port1)
Connector (LC Connector) used to connect this product to a Fibre Channel device.
Do not remove dust cover when not connected to Fibre Channel device.
(4) LED (Port0/Port1)
Two LED for each port (Port0/Port1) give a visual indication of the operating state.
The slow blink rate is 1 Hz; the fast blink is 4 Hz; the flashing state is an irregular on/off appearance
reflecting program activity.
Green LED
Yellow LED
Off
Off
Off
On
Off
Slow Blink
Off
Blink(1Hz)
Off
Flashing
On
Off
On
On
On
Blink(2Hz)
On
Blink(4Hz)
Slow Blink
Off
If the product fails at POST, please check the following items.
- Is the product installed in the computer correctly?
Important
- Are all Fibre Channel cables and power cords connected correctly?
(5)IEEE Address
IEEE Address of the product is displayed by this label.
The IEEE address correspond to the lower 12 figures of Worldwide Name(WWN)
of the product
Hint
Wake-Up Failure (Dead Board)
POST Failure (Dead Board)
Wake-Up Failure Monitor
Failure in POST
POST Processing in Progress
Failure While Functioning
Failure While Functioning
2Gbps Link Rate – Normal, link up
4Gbps Link Rate – Normal, link up
Normal – Link Down
- 31 -
State
Advertisement
Table of Contents
