Front Panel; Chapter 1 Basic Controls And Connections; Side Panel Controls - Vizio VF550XVT1A User Manual

VIZIO VF550XVT1A User Manual

Chapter 1 Basic Controls and Connections

Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights
white when powered on and orange when powered
off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass
to the sensor. Point the remote control directly at this
window for the best response to the remote signal.

Side Panel Controls

POWER ( ) – Power the TV on by pressing this button once. Press
the button again to power the TV off.
MENU – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu
level.
INPUT (ENTER) – Repeated pressing of this button steps through the
input sources in the following sequence: TV, AV1, AV2 (S-Video),
Component 1, Component 2, RGB, HDMI1, HDMI2, HDMI3, HDMI4
and HDMI5. Once you have stepped through the entire sequence, you
will return to the beginning of the sequence.
!
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, this button will show the current input selections.
!"
CH - – Use these buttons to step up or down the TV channels. While the OSD is active, these
buttons function as up and down controls in the OSD menus.
#$
VOL – Use these buttons to increase or decrease to the speaker volume. While the OSD is active,
these buttons function as left and right controls in the OSD menus.
10
www.VIZIO.com