Advertisement
en | 7 | T10483
1 General Information
Product name:
Product type:
Product number:
Weight:
Max. load capacity:
Static test coefficient:
Intended Use:
The engine support serves for holding the engine
and gearbox unit of the 3 cylinder injection engine
(1.0 l, 4V, EA 211 and 1.0 l, natural gas, 4V, EA 211)
in accordance with the workshop manuals of the
Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Only for use by qualified personnel with gas
powered vehicles.
Use only for loads up to 210 kg.
Only use in connection with a suitable engine and
gearbox lifter (e.g. VAS 6931/VAG 1383A) (see the
workshop manuals of the Volkswagen Group
brands).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Only use on level, horizontal and weight-bearing
ground.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-05-25
Engine support
Load holding device
T10483
6.8 kg
210 kg
3.0
Figure 1:
Engine support T10483
1
Bolt T10483/1
2
Base plate
3
Bolt T10483/3
4
Bolt T10483/2
5
Hexagon screw M12 x 35, 8.8 with spring ring (3 pieces)
6
Hexagon flange screw M8 x 25, 8.8 burnished (3 pieces)
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
Chapters
