Table of Contents
Advertisement
Bluetooth one touch connection via NFC (continued)
„ NFC connection for audio playback
Check that:
z Your device (smartphone / tablet) has an NFC function.
z NFC function on your device is enabled.
z Screen lock function of the device is off.
z This unit is not in low power consumption mode.
1
Touch your device to the NFC detection area on the
sound bar or supplied NFC tag.
NFC detection area
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
z The 'connected' message appears when the connec-
tion is complete.
3
Playback will start automatically. Otherwise, press
play (on remote control or source device).
z Sound will be heard from the speakers of this unit via
audio streaming.
z Your device must be within 10 metres (32 feet) from the
sound bar.
Listening to Bluetooth enabled devices
„ Bluetooth
Bluetooth wireless technology is a short-range radio technology
that enables wireless communication between various types of
digital devices, such as mobile phone or computer. It operates
within a range of about 10 metres (32 feet) without the hassle of
having to use cables to connect these devices.
This unit supports the following:
Communication System: Bluetooth Specification version 2.1
Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
z This unit cannot be used to talk over the telephone even when
there is a Bluetooth connection made to a mobile phone.
z Please refer to the operating manual supplied with the mobile
phone for details on operation of your mobile phone while
transmitting the sound using a Bluetooth connection.
Bluetooth operation buttons (remote control only)
NFC tag
Notes:
z To disconnect, simply touch your device to the NFC
detection area on the sound bar or NFC tag again.
Or
z This product switches to Bluetooth function automatically
when NFC tagging was done by your device.
z If your device does not support NFC, or if you wish
to listen to audio via Bluetooth connectivity without
NFC tag; refer "Pairing with other Bluetooth source
devices" on the next page.
z Some Bluetooth devices will connect to this product
automatically when the device or its Bluetooth mode
was turned on. In such case, it will also change the
function selection of this product. If you do not want it
to connect automatically, please disable Bluetooth on
your device.
z It takes about 6-8 seconds for a Bluetooth enabled
device (eg. smartphone) to establish Bluetooth
connection with this unit via NFC or manual connection.
z If "Empty tag" or similar message appears on your
device, touch the device again to the NFC detection
area on the main unit or supplied NFC tag.
„ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
z Pairing is made with more than 20 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 20 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
z This unit is reset. All pairing information is deleted when
unit is reset.
z Pairing information is deleted while re-pairing, etc.
E-15
Press to play or pause.
Press to skip up.
Press and hold to fast forward.
Press once to restart the current track.
Press twice to skip down.
Press and hold to fast reverse.
SOUND BAR HOME THEATER SYSTEM HT-SB603
Advertisement
Table of Contents
