Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Costar CDI2110IRF
Summary of Contents for Costar CDI2110IRF
- Page 1 Network Camera Quick Guide...
-
Page 2: Safety Precautions
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions lightning and power-line surges. If thunder or lightning is common where the equipment is installed, use a surge protection device. -
Page 3: Fcc Compliance Statement
FCC Compliance Statement THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. -
Page 4: Dome Cover
Overview • Product color and design may vary depending on the model. • For more details on each part name, refer to the operation manual. Dome Cover Bottom Vandal Dome Model Vandal Dome Model Shield Case Plastic Dome Model IR LED Non-Supported Model Side Cable Access Dome Cover Screws Safety Wire... - Page 5 Body Plastic Dome IR LED Non-Supported Model IR LED Lens Lens Rotator Horizontal Rotator SD Memory Card Slot Factory Reset Switch Safety Wire Screw Hole O-Ring Groove Wall/Ceiling Installation Hole Dome Cover Screw Hole Bottom Cover Plastic Dome IR LED Supported Model I/O Device Port Cable Access Hole Vertical Rotation Adjustment Screw...
-
Page 6: I/O Device Port
Camera Installation I/O Device Port Installation Check the wall or ceiling to see if it needs to be reinforced. The camera may fall off if the wall or 5 6 7 ceiling is not strong enough to support its weight. IR LED non- Shield case is included with supported model... -
Page 7: Angle Adjustment
Plastic Dome Model Adjust the angle of the lens. For more information, refer to the Angle Adjustment. Adjust the focus and zoom levers. Attach the shield case to the vertical rotation adjustment screw and secure it in place. IR LED non-supported model only Attach the dome cover to the bottom cover. -
Page 8: Specifications
Specifications General External Dimensions (Ø x H) 159mm x 122mm (6.3” x 4.8”) Packaging Dimensions (W x H x D) 205mm x 175mm x 205mm (8.1” x 6.9” x 8.1”) Weight (Main Unit) Vandal dome model 0.87kg (1.9 lb) Plastic dome model 0.51kg (1.1 lb) Weight Vandal dome model... - Page 9 Memo...
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Memo...
Need help?
Do you have a question about the CDI2110IRF and is the answer not in the manual?
Questions and answers