Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Costar CDI2510VIFWLH
Summary of Contents for Costar CDI2510VIFWLH
- Page 1 Network Camera Quick Guide...
-
Page 2: Safety Precautions
Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions 10. Overloading All the safety and operating instructions should be read before the Do not overload wall outlets and extension cords as this can result appliance is operated. -
Page 3: Fcc Compliance Statement
FCC Compliance Statement THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. -
Page 4: Dome Cover
Accessories Body Upon purchasing the product, check inside the box to make sure all the following accessories are included. Some parts may differ depending on the situation. Item Network Camera Quick Guide Terminal Blocks (2 ea.) Allen wrench Screws (3 ea.) Desiccant CVBS Cable Protect Connector (1 ea.) -
Page 5: Camera Installation
Camera Installation microSD Logo is a trademark of SD-3C, LLC. Installation Removing the Dome Cover Loosen the screws counterclockwise using the • Check the wall or ceiling to see if it needs to allen wrench provided with the product. be reinforced. The camera may fall off if the wall or ceiling is not strong enough to support its weight. - Page 6 Connect the safety wire with the bracket. Fasten Block the cable access hole for waterproofing the screws for the bottom cover clockwise using by using the enclosed cable access hole the allen wrench provided with the camera. rubber when routing the thin or several wires. Waterproofing sealing is required by using silicone etc.
-
Page 7: Closing The Dome Cover
Closing the Dome Cover Fasten the screws for the dome cover clockwise using the allen wrench provided with the camera. Remove the protective film inside and outside before closing the dome cover. Angle Adjustment Lens Rotation Horizontal Rotation Vertical Rotation Network Camera... -
Page 8: Specifications
Specifications Vandal Resistance Out-door Ready IP67, Heater Operating Temperature -40°C ~ +60°C (-40°F ~ +140°F) Boot Up Temperature -20°C ~ +60˚C (-4°F ~ +140˚F) Operating Humidity 0% ~ 90% Power Source , PoE(IEEE 802.3af, Class3) Power Consumption Max. 11.6W Approval FCC, CE, KC, IK10 External Dimensions (Ø... - Page 9 Memo...
- Page 10 Memo...
- Page 11 Memo...
Need help?
Do you have a question about the CDI2510VIFWLH and is the answer not in the manual?
Questions and answers