VIZIO Remote Control
Insertion of Batteries in the Remote Control
1. Remove the battery cover.
2. Insert two AA batteries into the remote control. Make sure that you
match the (+) and (-) symbols on the batteries with the (+) and (-)
symbols inside the battery compartment.
3. Replace the battery cover.
Precautionary Tips for Inserting the Batteries:
!
Only use the specified AA batteries.
!
Do not mix new and old batteries. This may result in cracking or
leakage that may cause a fire or lead to personal injury.
!
Inserting the batteries incorrectly may also result in cracking or
leakage that may cause a fire or lead to personal injury.
!
Dispose of batteries according to local hazardous waste regulations.
!
Keep the batteries away from children and pets.
Remote Control Range
!
The effective range of the remote control is approximately 23 feet (7
meters) from the front of the remote control sensor, 30° to the left
and right, 30° up and down.
!
Point the remote control at the remote control sensor to transmit the commands.
!
Do not place any obstacles between the remote control and the remote control sensor.
VIZIO Remote Control Precautions
!
The remote control should be kept dry and away from heat sources. Avoid humidity.
!
If your player responds erratically to the remote control or does not respond at all, check the
batteries. If the batteries are low or exhausted, replace them with fresh batteries.
!
When not using the remote control for a long period of time, remove the batteries.
!
Do not take the batteries apart, heat them, or throw them into a fire.
!
Do not subject the remote control to undue physical stress, such as striking or dropping it.
!
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp
cloth.
Version 8/19/2009
9
www.VIZIO.com
VIZIO VBR100 User Manual