Audio Menu; Pcm Downsampling; Digital Output; Dynamic Range Control - Vizio VBR100 User Manual

VIZIO VBR100 User Manual

Audio Menu

1. Press the SETUP button on the remote
control.
! "
2. Press or
! "
3. Press or
select Audio.
4. Press # to move to the list of options.
! "
5. Press or
then press #.
! "
6. Press or
then press SELECT.
7. Press RETURN once to return to the sub-
menu OR press SETUP to exit the
Settings menu.

PCM Downsampling

Select from 96KHz, 48KH, or Off. When connecting DIGITAL AUDIO OUT on your player to a surround
sound audio receiver, set the PCM downsampling rate to match your audio receiver capabilities. Consult
your audio receiver documentation for details on PCM sampling.

Digital Output

Select from PCM, Bitstream HD, Bitstream Legacy, or Bitstream Mixed.
!
PCM sends mixed digital audio over HDMI in 7.1 channel PCM (if supported by HDMI device)
and SPDIF in two-channel PCM format.
!
Bitstream HD sends the bitstream from the disc over HDMI and SPDIF using the highest quality
possible. HDMI has higher quality capabilities with advanced audio codecs like Dolby TruHD and
DTS-HD. Blu-ray disc audio is limited to the soundtrack for the main movie and does not send
PIP audio or audio effects.
!
Bitstream Legacy sends the audio from the disc over HDMI or SPDIF using legacy DVD audio
formats. Blu-ray disc audio is limited to the soundtrack for main movie and does not send PIP
audio or audio effects.
!
Bitstream Mixed sends mixed disc audio streams (including director's commentary and PIP
audio, if enabled, and menu sound effects) in a single DTS bitstream. Use this option if you want
to enjoy mixed Blu-ray Disc audio in surround sound.

Dynamic Range Control

This option is only active when a Dolby Digital signal is detected. If movie soundtracks are played at low
volume or from smaller speakers and you set this option to On, your player applies appropriate
compression to make low-level content more intelligible and prevents dramatic passages from getting too
loud. If set to Off, listen to movies at the dynamic range in which they were recorded. Selecting Auto
turns on the Dynamic range control for all BD movie soundtracks except Dolby TruHD. If you have
selected a Dolby TruHD track on the BD disc, Auto tells the BD player to only turn on dynamic range
control if information embedded in the Dolby TruHD sound track tells it to do so.
to select Settings.
on the remote control to
to highlight an option, and
to make your selection and
www.VIZIO.com
26