Connecting To Power; Powering The Camcorder On / Off; Initial Settings - HP f300c Quick Start Manual

Table of Contents

2.3 Connecting to Power

Use only the supplied car adapter to power up the camcorder and charge

the built-in battery.

Connect one end of the car adapter to the USB connector of the

camcorder.

Plug the other end of the car charger to the cigarette lighter

socket of your vehicle. Once the vehicle engine is started, the

camcorder automatically powers on.

Note:

1. The orange LED lights up while the battery is charging.

2. Please take note if the environment temperature reaches 45°C or above, the car

adapter still can supply power to camcorder, but it may not charge the battery. This

is characteristic of Lithium polymer battery and is not a malfunction.

Once the vehicle engine is started, the camcorder automatically powers

on. If the Automatic Record function is enabled, the recording will

automatically start right after the camcorder powers on.

Before using the camcorder, we recommend you to enable the Automatic Record

function and set up the correct date and time.

Table of Contents