Advertisement
3.
Insert the grommets on the wire harness into the
holes that you drilled.
4.
Remove the bracket on the light assembly and
install the bracket supplied with the kit
Figure 4
1. Nut
2. Bracket
5.
Use the existing hardware on the headliner to
secure the light bracket to the headliner
5).
Note:
Do not use the nylon washer when you
secure the bracket to the headliner.
(Figure
g033551
3. Bolt
4. Light assembly
(Figure
4).
1. Flange nut
2. Flat washer
6.
Connect the wire harnesses together
1. Wire-harness connector
7.
Connect the wire harness to the light assembly
(Figure
7).
3
Figure 5
3. Bracket
4. Shoulder bolt
(Figure
Figure 6
2. Grommet wires
g033552
6).
g033594
Advertisement
