High Mounted Stop Lamp Replacement - Hyundai Azera 2017 Owner's Manual

Maintenance
Turn Signal lamp
Stop/Tail lamp
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
7-74
6. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
Tail lamp, Back up lamp, Rear fog
lamp (if equipped)
If the light bulb does not operate, we
recommend that the system be
checked by an authorized HYUNDAI
OIG076044
dealer.
High mounted stop lamp
replacement
If the high mounted stop lamp does
not operate, we recommend that you
contact an authorized HYUNDAI
dealer.
OIG076041