Hyundai Azera 2017 Owner's Manual page 177

The high beam switches to low beam
in the below conditions.
- When the Smart High Beam is off.
- When the light switch is not in the
AUTO position.
- When the headlamp is detected
from the on-coming vehicle.
- When the tail lamp is detected
from the front vehicle.
- When the surrounding is bright
enough high beams are not needed.
- When streetlights or other lights
are detected.
- When vehicle speed is below
35km/h (15mph).
Warning light and message
When the Smart High Beam Assist
System is not working properly, the
warning message will come on for a
few second. After the message disap-
pears, the master warning light (
will illuminate.
We recommend that you take your
vehicle to an authorized HYUNDAI
dealer and have the system checked.
The system may not operate
normally in the below condi-
tions.
•
When the light from the on-
coming or front vehicle is not
detected because of lamp
damage, hidden from sight,
etc.
•
When the lamp of the on-com-
ing or front vehicle is covered
ODM046655L
with dust, snow or water.
•
When the light from the on-
coming or front vehicle is not
detected because of exhaust
fumes, smoke, fog, snow, etc.
)
•
When the front window is cov-
ered with foreign matter such
as ice, dust, fog, or is dam-
aged.
CAUTION
(Continued)
3-97
3