Data Logger Display Mode 4.6 - Partlow MRC 7800 Installation, Wiring, Operation Manual

P 32
AGE

Data Logger Display Mode 4.6

4.6.1 DATA LOGGER DISPLAY MODE OPERATION
The Data Logger Display mode allows the user to view the parameters and values that are
stored during data logging. In the Data Logger Display mode, the instrument operational
functions are all active, as in the Operate mode. This provides a means of viewing the logged
data, on-line, while the unit continues normal operation.
4.6.1.1 ENTERING THE DATA LOGGER DISPLAY MODE
From the Operation or any other mode code, depress the SCROLL key until dLd is displayed.
With dLd in the top display depress the DOWN key to enter the mode. If dLd does not
appear, then the mode has been disabled. Refer to Table 4-1 (page 25) for Enable mode
instructions.
4.6.1.2 MOVEMENT IN THE DATA LOGGER DISPLAY MODE
Each time the DOWN key is depressed while a parameter code is being displayed, another
parameter code will be displayed.
Depressing the SCROLL key while a parameter code is displayed will cause the parameter
value to appear. Depressing the SCROLL key with a parameter value displayed will cause
the next parameter code to come up in the display.
Depressing the UP key while a parameter code is being displayed will exit the Data Logger
Display mode and dLd will appear in the display. Using the SCROLL key at this point will
allow you to proceed to any other mode.