Transferring Pictures To The Computer; Connecting The Camera To Your Computer; Downloading Pictures - Vivitar Vivicam 3735 User Manual

digital camera
user's manual

Transferring Pictures to the Computer

After you have installed the camera software, connect the digital camera to your computer and
start transferring your pictures.

Connecting the Camera to Your Computer

Your digital camera comes with a USB cable that you can use to connect the camera to your
computer.
1.Plug the smaller connector of the USB cable into the digital port on your camera.
2.Plug the other end of the USB cable to your computer's USB port.
3.Since downloading pictures eats up battery power fast, use the AC power adapter whenever
you are transferring pictures to your computer.

Downloading Pictures

Once you have properly connected the camera to your computer, you are now ready to transfer
pictures. Make sure that the storage media is ready before you start downloading pictures.
Note:
If you want to transfer pictures stored in the internal memory, do not insert the CF card into your
camera.
If you want to transfer pictures stored in the CF card, make sure the CF card is inserted into your
camera.
1.Turn the dial knob to any of the camera modes (
on the status LCD.
2.To access the pictures on the CF card:
If you are using Windows, double-click My Computer on the desktop. You will then see
a drive labeled "Removable disk". Click that drive letter.
If you are using Macintosh, double-click the camera icon on the desktop.
3.Double click the DCIM folder.
4.To copy the picture files:
Double click the existing subfolder. Then, drag and drop the files to the desired location
on your computer's hard disk.
Note:
While the camera is connected to your computer, the camera will not allow you to take pictures.
You will also not be able to view pictures on the camera.
40
) ."PC" will then appear