Taking Burst Pictures; Using The Flash - Vivitar Vivicam 3735 User Manual

digital camera
user's manual

Taking Burst Pictures (

Burst pictures are a series of pictures that are photographed in sequence. You can use your
digital camera's Burst mode (
of 8 pictures can be taken in each capture. When you set the camera to Burst mode, the status
LCD shows the remaining sets of pictures that can be taken. For instance, if the remaining
storage in your memory card allows you to take 40 individual pictures, the status LCD will display
5 (that is, 40 pictures / 8 pictures per set = 5 sets of burst pictures) as the remaining sets of
pictures that can be taken in Burst mode. Burst pictures can be taken only at Half (1024 x 768)
resolution and at Medium or Low quality. If these settings are not chosen for your camera, the
camera automatically sets itself to Half resolution and Medium quality.
Here is how to take Burst pictures:
1.Turn the dial knob to Burst mode (
2.Press the LCD button to turn on the LCD monitor.
3.Press Menu button to display the menu screen on LCD monitor.
4.Press or
appears.
5.Press
6.Press or
on your preference.
7.Press Menu button to exit from menu screen.
8.Use the LCD monitor or optical viewfinder to center on the subject you want to take a picture of.
9.Press the shutter button halfway down to lock in the auto focus and exposure.
10.Press the shutter button all the way down to start taking multiple pictures.
You will then hear consecutive beeps which indicate that the camera is taking multiple pictures.
The camera will stop shooting pictures only when the Burst capture is completed.
Note:
Flash is disabled when your camera is in Burst mode
If the shutter button is pressed continuously, Burst capture will resume shooting pictures after
the first set of Burst pictures recorded to memory.

Using the Flash

Adjust the camera flash setting accordingly when you are taking pictures indoors and outdoors.
The flash has an effective range of approximately 0.5m to 3m.
The camera flash is automatically turned off when a White Balance setting other than Auto is
selected for use with the camera. The flash works in Capture (
24
button repeatedly until the Picture Menu screen
button to select the QUALITY option.
button to select Medium or Low quality, depending
)
) to capture an action sequence as a series of pictures. A set
) .
.
) mode.