Loading A Sd Memory Card; Attaching The Strap - Vivitar V3625 User Manual

Loading a SD memory card

(optional accessory)
The camera comes with 8MB of inter nal
memory, allowing you to store images and video
clips in the camera. However, you can expand
the memory capacity by using an optional SD
memory card so that you can store additional
images and video clips.
1. Make sure the camera is off.
2. Slide the battery/SD card cover in the direction of the OPEN arrow.
3. Insert the SD memory card.
The front side of the memory card (printed arrow) should face towards the front side of
E
the camera
If the card cannot be inserted, check the orientation
4. Close the battery/SD card cover.
To remove the SD memory card, make sure the camera is off. Open the
battery/SD card cover.
eject.
NOTE
• To prevent valuable data from being accidentally
erased from an SD card you can slide the write
protect tab (on the side of the SD memory card) to
"LOCK".
• To save, edit, or erase data on an SD memory card,
you must unlock the card.

Attaching the strap

To prevent accidental dropping of the camera
use the strap.
1. First thread the small loop of the wrist strap
through the strap eyelet on the camera and
then pull the large loop through the small loop
until the strap is firmly secured.
14
.
Press lightly on the edge of the memory card and it will
.
LOCK
Write protection
tab
, always
LOCK
Write protection
state