Pentair INTELLICOMM II Installation Manual page 5

Interface adaptor

Available languages

Connection from IntelliComm II to an IntelliFlo VF or IntelliFlo VSD pump is via a 15 m RS-485 communication cable (P/N 350122),

which is included in this kit.

Note: Connect m³/h - RPM 1, 2, 3, and 4 to any control output or auxiliary relay circuit (RELAY 1-4) on the automation circuit board.

Typically, m³/h - RPM 1 connects to Filter Pump. If more than one terminal input is active, the highest input number (m³/h - RPM 4)

will take priority regardless of the pump setting.

Connecting IntelliComm® II to IntelliFlo

ControlPro connection

RS-485 COMMUNICATION

CABLE (22 AWG)

9 - 24 VDC

RED

BLK

M³/H - RPM 1

(PROGRAM 1)

M³/H - RPM 2

(PROGRAM 2)

M³/H - RPM 3

(PROGRAM 3)

M³/H - RPM 4

(PROGRAM 4)

9 - 24V DC/AC

ControlPro+ connection